Page 1 of 1

My latest BP 1.8 dyno results

Posted: Mon Apr 22, 2013 7:32 pm
by wozzah1975
Though I'd share this. One of the guys in my club liked my BP conversion so much he has done one himself, except this one is turbod :)

Basically, the engine is a BP 1.8. Internally it has forged rods and pistons (eagles and wiseco from memory), block done by himself, and is fitted with one of my std valve head and mild cam packages. It runs a Brae Fabrications Exhaust manifold with a TDO5 20G Turbo fitted. It has taken a little bit of getting to it's current state, but now it's a screamer.

260rwkw on 24lbs on a 7200rpm limiter to date. This is a video of one of the earlier runs on less boost.

https://www.facebook.com/photo.php?v=10 ... =2&theater

Cheers
Woz

Re: My latest BP 1.8 dyno results

Posted: Mon Apr 22, 2013 8:03 pm
by manga_blue
So ... beware of white (or is it silver?) Escorts then! Couldn't you get the top 3rd of the curve a bit flatter? :D

Re: My latest BP 1.8 dyno results

Posted: Mon Apr 22, 2013 8:06 pm
by MrRevhead
What a super clean MK2 Escort with power to boot to match! (although, I will always have a soft spot for MK1's after seeing Geoff Newton's Cosworth powered one in the 90's
)

I will be interested to hear what he pulls down the quarter if he does a run in the future.

Re: My latest BP 1.8 dyno results

Posted: Mon Apr 22, 2013 8:07 pm
by wozzah1975
manga_blue wrote:So ... beware of white (or is it silver?) Escorts then! Couldn't you get the top 3rd of the curve a bit flatter? :D



Yes, beware! :) I'm not doing the tuning on this one, someone else is. It has been back since for a tidy up, and there are still some minor issues to sort I believe.

Cheers
Woz

Re: My latest BP 1.8 dyno results

Posted: Mon Apr 22, 2013 8:10 pm
by wozzah1975
wozzah1975 wrote:
manga_blue wrote:So ... beware of white (or is it silver?) Escorts then! Couldn't you get the top 3rd of the curve a bit flatter? :D



Yes, beware! :) I'm not doing the tuning on this one, someone else is. It has been back since for a tidy up, and there are still some minor issues to sort I believe.

Cheers
Woz


I think it's flatter now!! lol

Woz

Re: My latest BP 1.8 dyno results

Posted: Tue Apr 23, 2013 6:57 pm
by Eeyore
I'm looking to do a similar build with a new GTX2863R. I need to select the right cams for the job though. Aiming for 250rwkw.

Re: My latest BP 1.8 dyno results

Posted: Tue Apr 23, 2013 7:12 pm
by NitroDann
Good job wozzah, see if the one im working on now can crack 300wkw ! :)

Dann

Re: My latest BP 1.8 dyno results

Posted: Wed May 01, 2013 3:57 pm
by spikey
Good job Wozzah, just need to put one of those motor in one of these kit car based on the mx5.
http://www.youtube.com/watch?v=wsCJMcg3s88

track
http://www.youtube.com/watch?v=GT1bygfy154

race series
http://www.youtube.com/watch?v=jvwve2HGWK0