mx5cartalk.com

Hey all,

Need both new engine mounts for my NA8.

Genuine are about $100 each so hoping to find some cheaper aftermarket options.

Any suggestions?
Or if you have some?
Im in Vic
Cheers
Alex

I'm using IL Motorsport units, I think I bought them from MX5parts.co.uk? I can't remember but they were about $80 for the pair and they seem to work great, even with the extra torque of the turbo.

The MazdaSpeed ones are popular & very well priced:
http://www.corksport.com/mazdaspeed-mot ... miata.html

A number of group buys of these have occurred in the past so you might find someone has a set in the garage they've not used.

Think these are the ones Zossy's refering to:
http://www.mx5parts.co.uk/competition-e ... -2230.html

http://www.rspeed.net/R_Speed_Competiti ... 77038a.htm

Thanks guys IL's on the way

perfect timing this thread!

mine need replacing!

Alex,
what shop did you get them from? the US or UK?

PM'd

Thanks to Paul,

have the mazdaspeed ones being sent from corksport

a pair, delivered, a lot cheaper than here!

Hey guys
Sorry just saw that post!

I got mine from:
http://www.rspeed.net/R_Speed_Competiti ... 77038a.htm

They just arrived but havent opened them up yet...

Sorry for the delay!
Cheers

so how fubared where everyone elses mounts?

would also like to know where people are getting theses and how much they're paying for them.

Seems I can't get any landed for cheaper than what i can buy them in aus.

aren't OE engine mounts available? The OEM moulder is almost certainly going to be better than a non certified supplier. Mazda would have known something about what spec and what they were trying to achieve. All OEM rubber mounts are certified and tested for performance in a testing facility. All the tests are specified for X cycles and subjected to a variety of other tests like separation ageing etc. I would expect that the rubber spec / mount spec and testing requirements are never released by Mazda. If you only source on price you narrow the criteria,

mine worked out to be 119 australian delivered
156 out here

Mr Morlock wrote:aren't OE engine mounts available? The OEM moulder is almost certainly going to be better than a non certified supplier. Mazda would have known something about what spec and what they were trying to achieve. All OEM rubber mounts are certified and tested for performance in a testing facility. All the tests are specified for X cycles and subjected to a variety of other tests like separation ageing etc. I would expect that the rubber spec / mount spec and testing requirements are never released by Mazda. If you only source on price you narrow the criteria,

Mr Morlock, the mazda competition engine mounts, are made by mazda (the OEM) - part number: NAY1-39-040.

evil_weevil wrote:mine worked out to be 119 australian delivered
156 out here

Thanks, I realised the cart had 2 or 3 items in it, so the postage was much more than it should have been. I'll probably order some mounts from corksports tomorrow.

Don't know if this helps.
There postage seemed pretty good last time I used them.

http://parts.arlingtonmazda.com/product ... 40%29.html

Your going to have to copy and paste it sorry. I'm on a mac mother#ucker.
I can't use the bloody thing.
Cheers