Page 1 of 1
NA6 Thermo Switch connector
Posted: Sat Oct 16, 2010 5:40 pm
by Gazbo
Does anyone know where I can source the electrical connector (item 1 on the diagram) for the thermo switch ?
Are these standard electrical connectors that I could source from an auto-electrician ?
My connector has disintegrated.
Thanks!
Re: NA6 Thermo Switch connector
Posted: Sun Oct 17, 2010 10:39 pm
by toimr2
So has mine.
I would like to know as well
Cheers
Re: NA6 Thermo Switch connector
Posted: Mon Oct 18, 2010 6:00 pm
by Gazbo
These connectors seem impossible to source - as they are part of the car's wiring loom the only option would seem to be buying the entire loom from a wrecker.
My bare metal connector is just slid over the thermo switch's single pin, the connection is OK for a while but eventually it looses contact and the fan stops running causing overheating in traffic.
A quick wiggle of the connector fixes it again, for a short while...
Re: NA6 Thermo Switch connector
Posted: Mon Oct 18, 2010 6:07 pm
by rwf
just earth the wire fan will run all the time when engine is running
Re: NA6 Thermo Switch connector
Posted: Mon Oct 18, 2010 7:55 pm
by tbro
Try
http://www.bmotorsports.comyou will need plenty of patience and good eyes, but they can usually supply all those little things that no-one else can.