Page 1 of 1

ok to fill 6 speed via turret?

Posted: Sat Jun 12, 2010 7:08 pm
by rxmx
My car has the shifter and everything out atm and I need to put new oil in the box. Is it ok to fill it via the turret instead of the fill plug on passenger side of box? I have done some searching some say yes and some say no? is this due to variations in the 6 speeds?

Thanks,

Re: ok to fill 6 speed via turret?

Posted: Sun Jun 13, 2010 1:48 am
by wun911
NB8B yeah you can fill it from the turret esp if you cant get the fill plug undone.

not sure about the 10AE 6 speed...

Re: ok to fill 6 speed via turret?

Posted: Sun Jun 13, 2010 7:15 pm
by rxmx
thanks wun, i ended up filling it via turret with no dramas...

Re: ok to fill 6 speed via turret?

Posted: Fri Jun 25, 2010 1:04 pm
by NitroDann
I have filled mine through the turret twice, the fil hole is impossible to get to when you have a 6 speed in an NA.

Dann

Re: ok to fill 6 speed via turret?

Posted: Sun Jul 25, 2010 1:13 pm
by irwin83r
did you just put in a set amount of oil or something??
the fill hole is also the fill level

Re: ok to fill 6 speed via turret?

Posted: Sun Jul 25, 2010 8:38 pm
by greenMachine
irwin83r wrote:did you just put in a set amount of oil or something??
the fill hole is also the fill level


It's full when the oil starts running out .... :lol: That is not as bad as it sounds, you know how much they hold, so fast fill to close to that, more carefully as you get closer.

:mrgreen:

Re: ok to fill 6 speed via turret?

Posted: Tue Jul 10, 2012 7:37 pm
by jerrah
My 6 speed fill plug is impossible to remove (I should have done it with the engine out a few weeks ago) - if I fill through the turret how much do I put in? 2L?

I'm glad to see I can fill through the turret!

Re: ok to fill 6 speed via turret?

Posted: Tue Jul 10, 2012 8:30 pm
by Hjt
6 speed now ay mate :D

Re: ok to fill 6 speed via turret?

Posted: Tue Jul 10, 2012 8:34 pm
by NitroDann
Whatever the manual says, you can undo it with the right sized socket, cut the socket down shorter with an angle grinder and a cutoff disk, then it will fit easy.

Dann

Re: ok to fill 6 speed via turret?

Posted: Sat Jul 14, 2012 9:10 pm
by aviper4u
here's a guide which i found useful
http://www.miata.net/garage/6mt_fluid/index.html