Fitting larger capacity motor in QLD
Posted: Sat Feb 20, 2010 12:31 pm
Hi What is the biggest capacity I can fit into an NA in QLD and pass rego,does anyone know the formula
Cheers
Cheers
mx5cartalk.com
Australia's biggest and best MX-5 forum!!
https://mx5.net.au/forum/
Fitting larger capacity motor in QLD
Page 1 of 1
Fitting larger capacity motor in QLD
Posted: Sat Feb 20, 2010 12:52 pm
Search is your friend. There are many threads on this subject...
Fitting larger capacity motor in QLD
Posted: Sun Feb 21, 2010 9:41 am
Does anyone know the current regulations for fitting non std motors in QLD
Regulations and technology are always in a state of flux,so I intend to continue to ask questions that have been asked before. If questions were not asked and the status quo questioned the earth would still be flat.
WASP
Regulations and technology are always in a state of flux,so I intend to continue to ask questions that have been asked before. If questions were not asked and the status quo questioned the earth would still be flat.
WASP
Fitting larger capacity motor in QLD
Posted: Sun Feb 21, 2010 10:51 am
what you might consider doing WASP is make the enquiry with the Govt authority that regulates it in QLD.
Fitting larger capacity motor in QLD
Posted: Sun Feb 21, 2010 4:43 pm
What engine are you thinking of putting in there? There are 5's with V8's in them, and they're legal.... How big a capacity do you need, and why? If it's power you're after there are plenty of better ways to do that than to put a totally different engine in there.
As for the legalities, you're best off talking to an engineer who could approve/mod plate it, or contact QLD Transport. There are far too many 'opinions' rather than facts on the internet.
As for the legalities, you're best off talking to an engineer who could approve/mod plate it, or contact QLD Transport. There are far too many 'opinions' rather than facts on the internet.
Fitting larger capacity motor in QLD
Posted: Mon Feb 22, 2010 10:39 am
Like everyone said, do your own homework and actually ring the Engineering area of Qld Transport.
There is no need for you to send me smart-arse PMs;
Hi
You are obviously cleverer than I, do me a favour and find me a thread
that covers current regulations in QLD
Cheers
WASP
There is no need for you to send me smart-arse PMs;
Hi
You are obviously cleverer than I, do me a favour and find me a thread
that covers current regulations in QLD
Cheers
WASP
Fitting larger capacity motor in QLD
Posted: Mon Feb 22, 2010 6:21 pm
it would have taken you 2 min to find this 2 days ago 
http://www.transport.qld.gov.au/resourc ... icles2.pdf
section 3
basically you need a written submission
http://www.transport.qld.gov.au/resourc ... icles2.pdf
section 3
basically you need a written submission