mx5cartalk.com

Hi all,

I'm currently in the middle of installing the Nopro washer bottle and just wanted to ask exactly how everyone has installed theirs. Did you swap the washer lines on the bonnet around to face the opposite direction or just run another piece of hose back to the bottle? The reason I ask is I swapped mine to face the other direction and now they don't seem to have much pressure.. That said I never really use the washers so they may have always only sprayed 1/2 way up the window.

Also, to complete my noobiness could someone please post pics up of how to/an installed Cusco master cylinder stopper for a NB8A. I can't for the life of me work out where all the bars are meant to screw in

Cheers
Brad

I didn't run them the lines opposite way yet, but probably will at some stage. Maybe just check the turn straight off the pump and make sure that its not too tight and restricting flow.

Can't help with the Cusco brace but would be interested to see one installed.

Thanks
Troy

Thanks to all those who offered help and a big thanks to Andrew (1red5) for his efforts. I thought I'd upload a few pics of the Cusco Master Cylinder Stopper installed as this seems to have been asked a few times and never really answered 100%.

Oi!
Where did my CAS bolt go?

I had a bolt sitting at home that was slightly less obvious...