Page 1 of 1

mzr 2.0L NC motor into an NA6/8?

Posted: Fri Jun 05, 2009 12:07 pm
by JSE
anybody know if this is a fairly easy swap or if anybody has attempted it yet?

i'm just curious as i dont think i've seen this topic been brought up before.

mzr 2.0L NC motor into an NA6/8?

Posted: Fri Jun 05, 2009 2:53 pm
by mx52nv
JSE wrote:anybody know if this is a fairly easy swap or if anybody has attempted it yet?

No and no.

The MZR has the exhaust and intake on opposite sides, the gearbox is different from NA/NB, totally different wiring harness and ECM, position of motor is further back in the NC engine bay, etc etc etc etc ...

Of course, there is the fact that the effort and the gains would be minimal compared to a bolt-on turbo or supercharger kit on a NA/NB.

But that is just my opinion. :mrgreen:

If you had enough money you could do anything I suppose but the poignant question would be why? :wink:

Les @ MX5 Shop

mzr 2.0L NC motor into an NA6/8?

Posted: Fri Jun 05, 2009 2:59 pm
by JSE
cheers les

answered my question perfectly. naturally the gearbox would be different but i didn't know intake/exhaust were on different sides and that the motor position in the bay is different.

mzr 2.0L NC motor into an NA6/8?

Posted: Fri Jun 05, 2009 4:07 pm
by bruce
Nice idea, but the motor is so different, you may as well choose ANY motor you like and you will hit the same problems.

mzr 2.0L NC motor into an NA6/8?

Posted: Fri Jun 05, 2009 5:35 pm
by 16bit
if you could get it to fit then you could get a cosworth 300hp 2.3 duratech :twisted: .

mzr 2.0L NC motor into an NA6/8?

Posted: Fri Jun 05, 2009 6:49 pm
by SuperMazdaKart
Focus RS engine? 2.5L turbo 5 cylinder engine for something unique

mzr 2.0L NC motor into an NA6/8?

Posted: Fri Jun 05, 2009 11:06 pm
by Garry
Mazda did an engineering study and managed to fit it into an NB, though it's a very tight fit apparently.

mzr 2.0L NC motor into an NA6/8?

Posted: Tue Jun 09, 2009 7:34 pm
by evil_weevil
Joel,
Id go an SR20DET :)

mzr 2.0L NC motor into an NA6/8?

Posted: Fri Jun 12, 2009 12:26 pm
by JSE
evil_weevil wrote:Joel,
Id go an SR20DET :)



http://www.miatasr20.com/