Page 1 of 2

Improving Intake Sound ....

Posted: Sun Mar 01, 2009 8:44 pm
by kazjim
Ok, so I might be getting old, but i miss the induction roar of some of my old sports motors ...

My Na6a has a real nice, classic, sounding exhaust - i believe it is totally stock, but the intake is missing a little somthing ....
I've been considering a Pod filter - yea its ricey, but sounds great !

I know i will need an adaptor, but which one ?

Super crap had one that looked right, but didnt list any mazdas on the back ...

Also, I know i will need to shield the pod from hot air, as well as 'boxing' it for total legality ... :roll:

But is there a preferred "pod" filter / adaptor combo ?

Cheers
J

Improving Intake Sound ....

Posted: Sun Mar 01, 2009 9:17 pm
by bruce
There are a bazillion threads regards this. 'Search' is your friend.

Improving Intake Sound ....

Posted: Sun Mar 01, 2009 9:18 pm
by StanTheMan
where abouts are you?

I have the Mania CAI with the stock standard 20YO excaust from front to back.

You get music from the front & rear.

if you are in sydney.....come for a ride.

Improving Intake Sound ....

Posted: Sun Mar 01, 2009 10:06 pm
by CheyneX5
I also have the mania intake, it really roars down low and screams at high rpm. something you need to get!!!

Does require cutting of the firewall though......

Improving Intake Sound ....

Posted: Sun Mar 01, 2009 10:11 pm
by kazjim
I'm really trying to avoid the whole "cutting" thing ....

But, when in rome ....... :twisted:

The Pic of the Mania CAI shows what looks to be an RX-7 AFM ....
Image


Can i use this CAi with my NA 'flapper' AFM ?

J

Improving Intake Sound ....

Posted: Sun Mar 01, 2009 11:31 pm
by Locutus
yes, it's compatible with both. the AFM pictured is actually one which comes standard on (late model?) NA8s.

Improving Intake Sound ....

Posted: Mon Mar 02, 2009 10:22 pm
by Steampunk
bruce wrote:There are a bazillion threads regards this. 'Search' is your friend.

How many zeros in a bazillion? :roll:
I did a search and couldn't find the word bazillion :mrgreen:

Improving Intake Sound ....

Posted: Mon Mar 02, 2009 10:37 pm
by bensale
Why not just drill some holes in your stock air box? I made three one inch holes in the cold side of mine. Its given me the desired sound, similar to a CAI but no where near as loud or angry all the time like the mania one, but still nice and throaty when you want it to be.

I also drilled a few more holes, if you open up about 5-6 one inch holes it sounds about as loud and angry as the mania one, I just left it at three as I think that is a nice medium ground.

Best of all its free and is in my opinion a much better match to a stock exhaust as the mania firewall intake sound overpowers the standard exhaust note. You could also try taking the snorkel off the back of the air box, that gives a bit of growl at WOT with no other mods, but when you do that you pick up hotter air so I put it back on.

Improving Intake Sound ....

Posted: Mon Mar 02, 2009 10:37 pm
by philz
+1 for mania intake, super loud.

- also did what bensale has done, medium loud, and it's free, it's what I have currently.

Improving Intake Sound ....

Posted: Mon Mar 02, 2009 10:40 pm
by CheyneX5
X2 8)

Improving Intake Sound ....

Posted: Tue Mar 03, 2009 8:58 am
by kazjim
bensale wrote:Why not just drill some holes in your stock air box? I made three one inch holes in the cold side of mine. Its given me the desired sound, similar to a CAI but no where near as loud or angry all the time like the mania one, but still nice and throaty when you want it to be


Oh yes, I'm liking this one :)

I AM a tight-arse, and free is always better than $$$ in my book.

Its only for sound, i'll admit it, but it would still be nice....

I'll give it a go when I'm next in the garage ....

BTW, are stock Air-boxes easy to get hold of if i wish to return it to stock ?

cheers
J

Improving Intake Sound ....

Posted: Tue Mar 03, 2009 10:34 am
by bensale
Yes, any of the wreckers could sell you a stock intake box, they seem fairly common.

As a didn't like the volume of six holes so i covered three of them with black electrical tape :oops: I did that a few 1000 kms ago and haven't had any issues with it falling off and you can't see it either. For a free mod that takes only 15 minutes (taking my time) is definitely worth while and a good interim step before you spend the money on a mania intake or similar if you crave more noise and the slight performance increase.

Improving Intake Sound ....

Posted: Tue Mar 03, 2009 9:54 pm
by kazjim
Well, I bit the bullet and did it tonight ....

3 1.5" Holes on the cold-side (two on the bottom and one on the side)

Wow, much deeper at the wider throttle openings... very nice :twisted:

No Raucous, not offensive, but a nice deep tone ...

Also improved by removing the cover over the exhaust - no more annoying rattle :mrgreen:

Thanks guys, VERY recomended Mod ....

J

Improving Intake Sound ....

Posted: Tue Mar 03, 2009 10:08 pm
by bensale
Glad to here it, I'm definetly glad I did it too, a good match to the stock exhaust note isn't it, not overpowering.

Improving Intake Sound ....

Posted: Tue Mar 03, 2009 10:13 pm
by kazjim
Much better than the Pod i was considering.

Thanks again for talking me into it :roll:

J