Page 1 of 1
NA6 Headers
Posted: Sun Dec 07, 2008 9:30 pm
by corners
Well it seems my current heads decided to break at a weld and have also developed another crack.
What do people recommend to replace my current headers with?
The current ones look like tuned length 4 to 1 headers. They were on the car when it came from japan.
Cheers
NA6 Headers
Posted: Mon Dec 08, 2008 2:42 pm
by Steampunk
If money is not an object, then in my opinion, C.E.S. near Beenleigh are as good as it gets.
If you are on a budget, then just get yours re-welded/reinforced or put up an EOI on the for sale/WTB section.
Perhaps Genie makes a set?
If you want a custom set, then I can recommend Lee's Exhaust, but they are over at Springwood, so it's not all that easy for you to get to.
Opinions are divided between 4-2-1 vs 4-1 systems, so just go with what you have and what you are used to.
NA6 Headers
Posted: Mon Dec 08, 2008 2:59 pm
by corners
The guy I have taken the car too has recommened a hurricane 4 to 2 to 1 system
Will give CES a call.
I believe the headers are beyond repair.
NA6 Headers
Posted: Thu Dec 11, 2008 11:20 am
by trader
I've used those on ebay from a guy in Perth. Had them for 20 thou and no problems. They were cheap enough to spend extra on getting them ceramic coated. Price is up a bit now.
NA6 Headers
Posted: Thu Dec 11, 2008 11:51 am
by corners
trader wrote:I've used those on ebay from a guy in Perth. Had them for 20 thou and no problems. They were cheap enough to spend extra on getting them ceramic coated. Price is up a bit now.
The hurricanes or the CES racing ones?
NA6 Headers
Posted: Thu Dec 11, 2008 4:40 pm
by trader
Dont know - they didn't have a name but same supplier that's on there now. I did other mods at the same time so cant tell you the power gain.