Page 1 of 1
VIC ADR Engineer for modified MX5?
Posted: Thu Dec 20, 2007 9:41 am
by hamish71
As is in evidence in other parts of this forum, I am in the process of building up a NB MX5, with turbo. I intend doing this properly. Can anyone advise of a suitable engineer that they have used for certification?
Posted: Thu Dec 20, 2007 8:13 pm
by Matty
Get the list off the VicRoads website and call around.
From what I recall talking to a few about engine swaps (1.8 into 1.6) Frank Fordham (I think) was OK to deal with, but I never took it any further than a phonecall...
Posted: Thu Dec 20, 2007 10:14 pm
by Blue94t
Bill Malkoutzis is doing my SR20det conversion.
Great to deal with and the only one who would touch it.
You still need to get the epa certification done and about the only ones who do it are
http://www.vipac.com.au/ .
You are looking at between $1500 and $3k per test pass or fail.
Good luck with it and let us know how you go.
Jake
Posted: Fri Dec 21, 2007 7:13 pm
by hamish71
Had already got the list from vicroads. Franks response was a little confusing:
\"The modifications you propose are outside the guidelines for a vehicle manufactured in 2001 and as such I am not able to assist you.\"
I will try Bill.