mx5cartalk.com

Hey Guys..

im buying some silicone hose lengths to do such pipes as the radiator overflow pipes/oil breather pipe Etc basically every blue hose in the photo below of mx5maniac's sexy car (see pic below), however i will be getting YELLOW (no suprise there)



does anyone know what thickness hoses i will need to do all these..

i have found a set with 4mm 6mm and 8mm hoses....and another set has 4mm 6mm and 10mm hoses

your help is always appreciated


Cheers
Ajay

can anyone help me?

Can't really help you there mate, but you can clean the engine bay up a bit by putting the cannister under the wheel arch and moving the wiring loom behind the overflow container, washer reservoir to in front of radiator. No holes need to be drilled and it gets rid of that spagetti look - a good weekend job! If you have air horns put the compressor where the washer bottle is and run the tube around under the guard lip.

well thats not my engine bay.. but i would really like a similar design to steves..

Did we get any answers?

Cheers,
T

maaaaattte!.. i found what i need and will post pics.. my engine bay is finally finished but yes even without anyone on here knowing i was still able to find out

Cheers
AJay