Page 1 of 1
Posted: Mon Sep 17, 2007 7:52 pm
by ampz
They needs retensioning or replacing.
Belts should not be noisy. (except for mine which has a wobbly crank, fixed rather dodgily)
Posted: Mon Sep 17, 2007 9:42 pm
by Insurgence
Hi.
its not too hard to adjust the belt tensioner.
i cannot find a picture, but there is basically 2 bolts, one loosens the tensioner so that it may be adjusted, the other actually does the adjusting...
Posted: Mon Sep 17, 2007 11:15 pm
by green_comet
Retension your belt if it's in good condition, if it still makes noise spray some belt grip on it and the noise will stop.
Posted: Tue Sep 18, 2007 11:12 am
by Benny
First thing to do is to check the belts closely to see if they are cracked or have any bits missing from them, because if they do, then you will have to replace the belts before doing any re-tensioning on them, otherwise they might just break at the most inconvenient time.
Posted: Tue Sep 18, 2007 11:25 am
by bruce
My belts in the Suzuki squeal loudly for about 5 seconds when started from cold. Guess they need a bit of adjustment (they were all replaced 30K ago) ?
Posted: Tue Sep 18, 2007 5:39 pm
by green_comet
Belt grip stops that..
Its an awesome product.