Page 1 of 1
Draining the box turret?
Posted: Sat Jun 17, 2006 1:21 pm
by maxwolfie
Is there a way/point? I have some leftover redline that I want to chuck in there, but it's half full of murky crap
Posted: Sat Jun 17, 2006 1:30 pm
by JBT
You'd have to suck it out with a syringe or similar device. It doesn't hold much oil in there.
Posted: Sat Jun 17, 2006 8:02 pm
by mightyrollaman
Or you could just suck it out with a length of tube, then let it dribble out to a icecream container below.
Posted: Sat Jun 17, 2006 8:27 pm
by green_comet
i used my oil pump so suck it out, into a container..
Posted: Sat Jun 17, 2006 9:03 pm
by bigdog
Re:
Posted: Sat Jun 17, 2006 9:36 pm
by StanTheMan
Posted: Mon Jun 26, 2006 10:10 pm
by irwin83r
trick is to stick the tube in fluid first and fill the tube, then plug both ends with your thumbs, then quickly let go of one end and cram it into the fluids deepest point then you should be able to put the end with your thumb on it still into a container at a lower point. this way you dont have to worry about coppin a mouth full might take a go or two to get used to, but after getting a mouthful of who knows what from an industrial pump i was tryin to drain before i stripped it when i was a first year i quickly realised theres gotta be a better... tasting way
