Page 1 of 1
COMPRESSION RATIO B6T PISTONS
Posted: Wed Mar 15, 2006 4:10 pm
by spikey
Just wondering if anyone know what compression ratio the factory B6t pistons run.any help would be appreciated.
Terry
Posted: Wed Mar 15, 2006 7:53 pm
by Sheck
Dont quote me on this but i've always been under the impression that they were 7.8-7.9:1.
I remember reading about it somewhere a good while ago, so my memory is pretty foggy on it.
But i'd say it wouldnt be much higher than the above figure.
Try fordlaser.com forums, they will definately know.
Dave
compression
Posted: Wed Mar 15, 2006 9:45 pm
by spikey
Just checked on one of the Charts B6T run a 7.9-1 ratio,so it should be good for boosting.
Posted: Fri Mar 17, 2006 7:58 pm
by Sean
Yep 7.8 and 7.9, there was apparently a small variation and the later models are the lower comp ones. if you buy from mazda brand new you get 7.8:1
Re: COMPRESSION RATIO B6T PISTONS
Posted: Sat Mar 18, 2006 2:43 pm
by glen73
spikey wrote:Just wondering if anyone know what compression ratio the factory B6t pistons run.any help would be appreciated.
Terry
seems to me your going FI. why didnt you keep the injectors you sold me for your project? theres nothing wrong with them is there
b6t
Posted: Mon Mar 20, 2006 11:19 pm
by spikey
The only thing wrong with the injectors could be that they are too big for a 1.6 with 7.9:1 compression motor,so I have to source some 330cc for now.
b6t
Posted: Mon Jul 03, 2006 7:14 pm
by spikey
It works out my tuner is the problem and not the size of the injectors.
Re: b6t
Posted: Mon Jul 03, 2006 7:15 pm
by glen73
spikey wrote:It works out my tuner is the problem and not the size of the injectors.
lollollol
find yourself someone decent.