Page 1 of 1
HKS 264 degree cams
Posted: Wed Jan 11, 2006 11:36 am
by spikey
Has anyone used this on their NA6?I bought them to try it on my Na6 turbo that I'm putting together,would it make much difference on a turbo car or are these made for Na motors?any info would be great.these have a 8.78lift on them.
Thanks
Posted: Wed Jan 11, 2006 11:50 am
by PASHN8
Would make a good difference with a decent sized turbo and boost. I believe the best combo is a 264/272 combo for the street.
What sort of boost are you going to run?
Posted: Wed Jan 11, 2006 12:35 pm
by Okibi
G'day Spikey,
Have you become a member of the MX-5 Club of WA yet?
We have our monthly after work get together tonight at Wheelspin 1/30 Adams Drive Welshpool. Drop past and say g'day.
cams
Posted: Wed Jan 11, 2006 10:23 pm
by spikey
Okibi,Still fixing some side intrusion bars in my Legacy at the moment,so don't have time tonight but I will go to one of your meetings,Thanks.
Pashn8
I'm going to be running a Tdo5 16G turbo and I'm planning to run about 10-12psi.got the wiring harness for the Haltech made up,so it won't be long now then we can see how much boost it can take.
Posted: Thu Jan 12, 2006 12:29 am
by Okibi
If you don't end up putting those cam's in, i know someone in WA looking for a set.
Posted: Thu Jan 12, 2006 1:10 am
by PASHN8
Trust TD05 or a Mitsubishi TD05?
cams
Posted: Thu Jan 12, 2006 2:34 am
by spikey
Greddy tdo5.
Posted: Thu Jan 12, 2006 9:49 am
by PASHN8
Trust/GReddy, same company
I take it its internal gated? what flange is that? WRX TDO5?
CAMS
Posted: Thu Jan 12, 2006 3:59 pm
by spikey
IT COMES WITH A TRUST CUSTOM STAINLESS MANIFOLD AND WILL BE RUNNING A TIAL 38MM EXTERNAL WASTEGATE.IT IS NOT A WRX TDO5 FLANGE.
Posted: Sun Jul 22, 2007 9:44 pm
by Uncle Arthur
What sort of response would you expect with just the 264 inlet cam and a standard exhaust cam (with boost)....?
Posted: Sun Jul 22, 2007 9:47 pm
by AJ
mismatched cams???........you need a glass of water mate
Re:
Posted: Mon Jul 23, 2007 11:35 pm
by Sean
Okibi wrote:If you don't end up putting those cam's in, i know someone in WA looking for a set.
http://www.aus-cartalk.com/viewtopic.php?t=26208