Coiack failure

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

DarrylA
Driver
Posts: 97
Joined: Mon Jan 28, 2013 5:22 pm
Vehicle: NB8A
Location: Leopold - 10 minutes out of Geelong VIC

Coiack failure

Postby DarrylA » Sun Jul 30, 2017 4:28 pm

Could some wise person shead some light for me. Mine is a 98 NB8A with a highly modified normally aspirated engine (new).
Just run in and gave it a good run at Winton. I normally run it to 8000rpm with no issues, but because it's fairly new (1500 kms) limited it to 7500 rpm. Occassionly l was getting a slight miss at about 6500rpm with the tachometer needle bouncing. New plugs, comp ht leads, throttle body sonic cleaned, cam angle sensor and crank angle sensor standard, as is fuel pump.

Red_Bullet
Speed Racer
Posts: 3119
Joined: Tue Mar 11, 2014 8:33 pm
Vehicle: NA8 - Supercharged
Location: Brisbane

Re: Coiack failure

Postby Red_Bullet » Sun Jul 30, 2017 5:04 pm

What ECU is in it? Is it rev limiting by cutting spark?

DarrylA
Driver
Posts: 97
Joined: Mon Jan 28, 2013 5:22 pm
Vehicle: NB8A
Location: Leopold - 10 minutes out of Geelong VIC

Re: Coilpack failure

Postby DarrylA » Sun Jul 30, 2017 5:08 pm

Using a Microtech LT10s

Red_Bullet
Speed Racer
Posts: 3119
Joined: Tue Mar 11, 2014 8:33 pm
Vehicle: NA8 - Supercharged
Location: Brisbane

Re: Coiack failure

Postby Red_Bullet » Sun Jul 30, 2017 6:13 pm

I was thinking that if the ECU was cutting spark then the tacho would bounce around if the tacho is still dríven off the coilpack. If the tacho is dríven off the ECU then that's another matter.

User avatar
bruce
Speed Racer
Posts: 7706
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NA8 - Turbo
Location: Victoria
Contact:

Re: Coiack failure

Postby bruce » Sun Jul 30, 2017 6:16 pm

When I had problems with my coiack, my doctor said I should eat more fibre.

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Coiack failure

Postby NitroDann » Sun Jul 30, 2017 8:00 pm

Consider the ignition trigger.
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

StillIC
Racing Driver
Posts: 862
Joined: Sat Jan 01, 2011 2:30 pm
Vehicle: NA6
Location: Newcastle

Re: Coiack failure

Postby StillIC » Sun Jul 30, 2017 8:23 pm

I had exactly the same symptoms. Rapidly deteriorated (the next run on the track that day it was much worse). I had blown one of my Toyota COP coils. New coil, all fixed.
WP:1.12.492 SMPN:1.16.403 SMPS:1.05.473 SMPGP:1.53.256 SMPB:2.22.181

Red_Bullet
Speed Racer
Posts: 3119
Joined: Tue Mar 11, 2014 8:33 pm
Vehicle: NA8 - Supercharged
Location: Brisbane

Re: Coiack failure

Postby Red_Bullet » Sun Jul 30, 2017 9:06 pm

bruce wrote:When I had problems with my coiack, my doctor said I should eat more fibre.


Hahahahahha :lol: :lol: , damn doctors, what would they know.

User avatar
bartmanftw
Fast Driver
Posts: 451
Joined: Wed Oct 30, 2013 1:35 pm
Vehicle: NA6
Location: Victoria

Re: Coiack failure

Postby bartmanftw » Mon Jul 31, 2017 11:13 am

As Dann said look at the cam/crank trigger sensors. The tacho is ECU dríven, not coil dríven so if you are getting a misfire and the tacho is dropping out then it is most likely one of your trigger sensors is dropping out.

DarrylA
Driver
Posts: 97
Joined: Mon Jan 28, 2013 5:22 pm
Vehicle: NB8A
Location: Leopold - 10 minutes out of Geelong VIC

Re: Coiack failure

Postby DarrylA » Mon Jul 31, 2017 1:34 pm

Thanks for the constructive responses as well as the smart arse ones.
Not a great typist with one finger on an iPad. Sorry guys.
I'll check trigger sensors first before going onto coilpack


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 24 guests