Quick question (1.8 LSD)

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

Post Reply
Sage
Fast Driver
Posts: 218
Joined: Tue Sep 25, 2012 9:11 am

Quick question (1.8 LSD)

Postby Sage » Mon Jan 12, 2015 2:23 pm

Hi all, just swapping out my 1.6 open for for a 1.8 LSD. Trying to put the new half shafts into the new LSD though front what i can see the C clip on the end if fowling somewhere in the diff.

Cause its a C clip i assume its keyed somewhere inside the diff though i dont know where.

If i remove the C clips the half shafts go in fine. Put then back on and they dont go in all the way.

Anyone able to provide a little help?

Thanks very much!
Top
The American
Forum Guru
Posts: 1525
Joined: Fri Jun 29, 2012 9:23 pm
Vehicle: NB8B - Turbo
Location: Brisbane, Qld. Previously Perth WA
Contact:
Contact The American

Re: Quick question (1.8 LSD)

Postby The American » Mon Jan 12, 2015 5:58 pm

In my experience, a firm tap is required. The clip is designed to retain the axle in the diff.
Top
User avatar
green_comet
Car Detailing Guru
Posts: 1848
Joined: Tue May 24, 2005 1:41 am
Vehicle: NA8
Location: Melbourne

Re: Quick question (1.8 LSD)

Postby green_comet » Mon Jan 12, 2015 6:37 pm

Yep, just give the shaft a quick shunt and it'll clip in.
Top
Sage
Fast Driver
Posts: 218
Joined: Tue Sep 25, 2012 9:11 am

Re: Quick question (1.8 LSD)

Postby Sage » Mon Jan 12, 2015 6:38 pm

Thanks guys will give it a shot
Top
Post Reply

Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 97 guests