NC Cooling Fan
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
- JBT
- Speed Racer
- Posts: 7946
- Joined: Tue Jun 03, 2003 11:00 am
- Vehicle: NC
- Location: Brisbane
Re: NC Cooling Fan
Beats me CB. I watch my oil and temp gauges like a hawk and the temp is rock steady. I also listen for anything after shutdown and nothing has ever been heard.
-
- Learner Driver
- Posts: 11
- Joined: Sun Apr 13, 2014 1:57 pm
- Vehicle: NC
Re: NC Cooling Fan
Hi Everyone, thanks again for your help. Mazda tell me the thermostat is sticking and now I'm waiting for a new one. Apparently they have none in Melbourne!
Thanks again
Thanks again
- Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Re: NC Cooling Fan
it usually gets stuck open, did the car throw a CEL light?
thats about the only way you can check if the thermostat is stuffed. its a big job to get it replaced, especially if you are not doing it yourself....
just saving you some $$ Mazda could just be spinning that story to you
thats about the only way you can check if the thermostat is stuffed. its a big job to get it replaced, especially if you are not doing it yourself....
just saving you some $$ Mazda could just be spinning that story to you
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
- Charlie Brown
- Speed Racer
- Posts: 2623
- Joined: Mon Apr 28, 2003 11:00 am
- Vehicle: NC
- Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
- Contact:
Re: NC Cooling Fan
No CEL when mine went Regie.
Jackdog, I got my thermostat from Goodwin Racing in the US. Took about a week which was far quicker than waiting 2 months and paying twice as much from Mazda AU.
If you want to see how to do it yourself, look at this link as I did a write up on it.
viewtopic.php?f=79&t=49246
Jackdog, I got my thermostat from Goodwin Racing in the US. Took about a week which was far quicker than waiting 2 months and paying twice as much from Mazda AU.
If you want to see how to do it yourself, look at this link as I did a write up on it.
viewtopic.php?f=79&t=49246
- Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Re: NC Cooling Fan
Ahh I'm wrong
But good call CB, get it from the states if you haven't order already
But good call CB, get it from the states if you haven't order already
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
-
- Learner Driver
- Posts: 11
- Joined: Sun Apr 13, 2014 1:57 pm
- Vehicle: NC
Re: NC Cooling Fan
The car was ready early and picked it up this morning. I've been for a drive and the temperature needle is rock solid below half way. The fan did not operate after I shut down the engine. An expensive fix but at least it's fixed.
Does anyone know much about the Goodwin Racing Roadstersport Q muffler. I'm interested in the new one with the rolled tips. GWR say they no longer ship to Australia and MX 5 Mania's version appears to be the older version without the rolled tips.
Thanks
Does anyone know much about the Goodwin Racing Roadstersport Q muffler. I'm interested in the new one with the rolled tips. GWR say they no longer ship to Australia and MX 5 Mania's version appears to be the older version without the rolled tips.
Thanks
- Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Re: NC Cooling Fan
jackdog wrote:The car was ready early and picked it up this morning. I've been for a drive and the temperature needle is rock solid below half way. The fan did not operate after I shut down the engine. An expensive fix but at least it's fixed.
Does anyone know much about the Goodwin Racing Roadstersport Q muffler. I'm interested in the new one with the rolled tips. GWR say they no longer ship to Australia and MX 5 Mania's version appears to be the older version without the rolled tips.
Thanks
email chris@targaracing.com.au
He is the new goodwin stockist, and has a shipment due this week from them
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: Google [Bot] and 122 guests