Air-cond compressor clutch question

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

User avatar
aka_juffa
Racing Driver
Posts: 1005
Joined: Wed Dec 14, 2011 2:40 pm
Vehicle: NA8
Location: SE Melbourne.

Air-cond compressor clutch question

Postby aka_juffa » Sat Sep 28, 2013 5:41 pm

Ever since I have owned Snow White her air cond has never worked. With summer coming up I would like to fix this.

So far the following has been done.

System regassed. At the time the mechanic noted that the air-cond compressor clutch didn't have power. He wasn't sure if this was due to a faulty relay, gas pressure switch, or something else. I decided not to have any further work done at that time.

I have now checked both relays that sit behind the drivers headlight. They both appear to work OK.

Today I tested the air-cond clutch today as per instructions in my enthusiast's guide. While doing this I found a unconnected plug on a wire that runs to the air-cond compressor. I fixed this and can confirm that there is a magnetic field at the clutch.

I have two questions.
How can I tell if the gas is actually flowing through the system (air through vents is no cooler)?
Should the front cover/plate on the compressor clutch also rotate, or remain loose/still?

J
Motor Neurone Disease chose me, I choose Voluntary Assisted Dying.

Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 64 guests