Over time I have had some temperamental shuddering coming from my rear passenger wheel. It seems to only occur in reverse and sometimes in first gear. After doing some research, I have reason to believe it is a bad U-Joint. My car is a 1990 NA6.
How would I go about making sure that it is in fact the U-Joint and what would be the best way to replace it? I read that the driveshaft and U-Joint are one unit? I think that's only for the NA8+ but someone said it was the case for the NA6 as well.
Bad U-Joint?
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
- de Bounce
- Racing Driver
- Posts: 1091
- Joined: Thu Feb 12, 2009 5:19 pm
- Vehicle: NC
- Location: Northern Burbs - Melbourne
Re: Bad U-Joint?
MX5 drive shaft rarely give trouble.
The rear brake calipers are known to seize, specially on the NA's
A sticking caliper could produce the shudder.
Have you checked they are releasing and moving correctly!
The rear brake calipers are known to seize, specially on the NA's
A sticking caliper could produce the shudder.
Have you checked they are releasing and moving correctly!
-
- Fast Driver
- Posts: 192
- Joined: Fri Nov 11, 2011 7:42 pm
Re: Bad U-Joint?
I had a rear caliper seizing on my NA - a real basic quick way to check is put your hand on the rim and check the temperature - my rim got rather warm compared to the others.. (and a bit stinky..)
-
- Speed Racer
- Posts: 11854
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: Bad U-Joint?
Another consideration given it occurs in reverse, & occasionally first gear, is a loose PPF bolt or a crack in the PPF:
viewtopic.php?f=29&t=40896
viewtopic.php?f=29&t=42534
viewtopic.php?f=29&t=40896
viewtopic.php?f=29&t=42534
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 41 guests