what are good NB injectors

james_p93 · Postby **james_p93** » Wed Jan 16, 2013 4:49 pm

i have a SE with only an inter cooler and the boost turned up to 9 pounds. i need injectors and dont know where to look or even what im looking for. i plan on running up to 15psi in the furture so need something to support that. i dont know much so any advise/ constuctive advise is welcome. THANKS!

James

Postby **NitroDann** » Wed Jan 16, 2013 4:57 pm

15psi is not a flow rate.

how much horsepower do you need to support on what fuel and ecu?

Dann

james_p93 · Postby **james_p93** » Wed Jan 16, 2013 5:25 pm

NitroDann wrote:15psi is not a flow rate.

how much horsepower do you need to support on what fuel and ecu?

Dann

gotta get alot of other stuff first, trying to find all the parts i need to" complete" the SE. goal is 180 rwkw, i fill up on bp98, still looking for an ecu :/
sorry not much info,
thanks,

James

Postby **NitroDann** » Wed Jan 16, 2013 5:34 pm

Gonna do something like peters SE?

Throw on a T28 etc?

Dann

Lokiel · Postby **Lokiel** » Wed Jan 16, 2013 6:05 pm

321cc injectors are the largest that the stock ECU can Idle correctly but these are VERY hard to locate.

It's easier to find 305/315cc Supra injectors (these seem to be the same injectors, it just depends on who's selling them as to what they market them as).

I have a set of 6 from a Supra that I used on my car prior to my 600cc injectors if you're interested (only used 4 obviously). Unfortunately I only have 4 of the rubber spacers left since I destroyed one when I initially installed them and lost the other one when it rolled into my engine bay, never to be seen again - ya gotta watch out for that. You only need 4 though.

Here's the best write-up on installing injectors I've seen so far: http://clubroadster.net/vb_forum/58-forced-induction-sponsored-kraftwerks-usa/27215-mazdaspeed-mx5-denso-321cc-23250-74050-injector-info.html

james_p93 · Postby **james_p93** » Wed Jan 16, 2013 6:06 pm

NitroDann wrote:Gonna do something like peters SE?

Throw on a T28 etc?

Dann

does he have a garage thread? and whats a T28 xD haha sorry
Thanks

James

Postby **NitroDann** » Wed Jan 16, 2013 6:16 pm

Have a scan over the last 15 pages of my thread in the garage section.

Dann

Postby **NitroDann** » Wed Jan 16, 2013 6:28 pm

If you start from here and read whenever you see pics of turbo parts you will get the idea.

viewtopic.php?f=57&t=47747&start=555

Its a lot of info, but it sounds like you need it.

Dann