Gidday forumites,
I'm asking this question on behalf of a friend, who's got a restoration project on the trot... Is it possible to pair the 1.6L NA engine with the 6 speed manual from any of the NBs? If so, what are the concerns and issues that he would need to be aware of?
All thanks in advance.
Engine and gearbox compatibility
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
7StringSamurai
- Fast Driver
- Posts: 139
- Joined: Mon Jan 04, 2010 10:31 am
- Vehicle: NC
Engine and gearbox compatibility
"Life is NOT one big joke; it's 89,000 little jokes" - Richard Prior
2005 NC Series 1 in Galaxy Grey
2005 NC Series 1 in Galaxy Grey
-
NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: Engine and gearbox compatibility
Yeah all na/nb engines will pair up with any other.
Only thing you need to know is 6 speed 1.6L will not use one of the gearbox bolts, it is fine dont worry about it.
Dann
Only thing you need to know is 6 speed 1.6L will not use one of the gearbox bolts, it is fine dont worry about it.
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
-
Mr Morlock
- Speed Racer
- Posts: 6444
- Joined: Mon Feb 04, 2008 11:40 am
- Vehicle: NB8B
- Location: Melbourne
Re: Engine and gearbox compatibility
If it's a restoration project he may not want to put in a 6 speed gearbox especially if the 5 speed works well or can be repaired. One of the issues with any restoration or makeover is considering how much to spend and what it's worth at the end. Some drivers prefer the 5 speed and they were fitted to NB P1 as well as NA's.
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 95 guests
