Ally radiator..Sacrificial anode?

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

deviant
Racing Driver
Posts: 1717
Joined: Thu Apr 15, 2010 7:23 pm
Vehicle: NB8B
Location: Rockingham - Western Australia

Ally radiator..Sacrificial anode?

Postby deviant » Wed Aug 15, 2012 11:36 pm

I have noticed that inside the filler holes on my ally (ASI) radiator there is some black crusty stuff...Is this the start of a corrosion problem?

Do I need to figure out some sort of sacrificial anode? What have others done?

sailaholic
Speed Racer
Posts: 3511
Joined: Thu May 19, 2011 3:38 pm
Vehicle: NA8
Location: Brisbane

Re: Ally radiator..Sacrificial anode?

Postby sailaholic » Thu Aug 16, 2012 7:31 am

An anode will not work, at best you might protect half of the tank and none of the core.

Aluminum actually oxidises very quickly, but the oxide sticks and prevents further oxidation. Aluminium oxide is quite dark but will generally be smooth rather then crusty.

Post a photo if you want, but basically the anti corrosive in your radiator fluid should stop any corrosion.

Sent from my GT-I9100 using Tapatalk 2

User avatar
greenMachine
Forum Guru
Posts: 4054
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NB SE
Location: Sports car paradise - Canberra
Contact:

Re: Ally radiator..Sacrificial anode?

Postby greenMachine » Thu Aug 16, 2012 11:23 am

Seconding the normal antifreeze/anti corrosion stuff, that is all you need.

Green is good :wink:

:mrgreen:
I never met a horsepower I didn't like (thanks bwob)

Build thread

NB SE - gone to the dark side (and loving it 8) )

User avatar
bruce
Speed Racer
Posts: 7707
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NA8 - Turbo
Location: Victoria
Contact:

Re: Ally radiator..Sacrificial anode?

Postby bruce » Thu Aug 16, 2012 4:12 pm

Years ago there was a big thread about radiators and anodes. Quite a bit of scientific discussion. Of course I can't find it...

sailaholic
Speed Racer
Posts: 3511
Joined: Thu May 19, 2011 3:38 pm
Vehicle: NA8
Location: Brisbane

Re: Ally radiator..Sacrificial anode?

Postby sailaholic » Thu Aug 16, 2012 4:30 pm

I can tell you it is not effective.

To get technical, you get basicly 4 times the diameter of your vessel where the anode is effective. This means if you put the anode next to a cooling bar pipe 1mm in diameter then you get roughly 4mm down that pipe and your anode stops having an effect.

Better then electric rust proof though! That is a huge con!

Sent from my GT-I9100 using Tapatalk 2

User avatar
hks_kansei
Speed Racer
Posts: 6154
Joined: Tue Feb 03, 2009 10:43 am
Vehicle: NB8A
Location: Victoria

Re: Ally radiator..Sacrificial anode?

Postby hks_kansei » Thu Aug 16, 2012 4:40 pm

sailaholic wrote:Better then electric rust proof though! That is a huge con!


Does that even work in theory?

Every car I've seen with an "electric rust stopper" or whatever, installed has had massive bits of rust forming around where the device it attached.
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)

sailaholic
Speed Racer
Posts: 3511
Joined: Thu May 19, 2011 3:38 pm
Vehicle: NA8
Location: Brisbane

Re: Ally radiator..Sacrificial anode?

Postby sailaholic » Thu Aug 16, 2012 5:06 pm

Depends on the system as to how close they get to almost working under the right conditions. :lol:

The best are fundamentally flawed unless you park your car in water (immersed).:!: And have huge battery capacity. Some don't even attempt to follow the theory.

Electronic rust prevention is based on the concept of cathodic protection which does work. But the thing your protecting and your anode have to be in a common electrolyte. Hence why anodes work on boats and not cars bodies.


Sent from my GT-I9100 using Tapatalk 2

deviant
Racing Driver
Posts: 1717
Joined: Thu Apr 15, 2010 7:23 pm
Vehicle: NB8B
Location: Rockingham - Western Australia

Re: Ally radiator..Sacrificial anode?

Postby deviant » Thu Aug 16, 2012 10:32 pm

Thank you chaps. I did not manage to get a picture yet...it is at the bottom of the filler neck on the radiator that there is some black stuff that is crusty and breaks off. I can not see anything in the core of the radiator.

I had a brief read on something earlier that mentioned that it can actually be bad to have an anode in a car system as it reduces how well the anti-corrosion stuff in coolant works.


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 102 guests