Hi,
I'v recently purchased a a torrsen type II diff for my NA6 (replacing my old busted open 1.6) and am needing a little help concerning speed calibration.
Will my speedo be out? the torrsen has 3.9 gearing and if so where can i find a fix for the problem?
Any help would be greatly appreciated Eren
Speedo calibration kit
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
ekavaz
- Driver
- Posts: 31
- Joined: Tue Apr 27, 2010 11:39 pm
- Vehicle: ND - 2
- Location: sydney
-
Matty
- Racing Driver
- Posts: 1652
- Joined: Wed Apr 23, 2003 11:00 am
- Vehicle: NB8A
- Location: Melbourne
- Contact:
Re: Speedo calibration kit
You'll need to find the correct speedo drive gear (it plugs into the gearbox). Might be hard to find as I don't know if people commonly separate them.
-
Hammer
- Speed Racer
- Posts: 2849
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NB SP
- Location: Sydney
- Contact:
Re: Speedo calibration kit
Give MX5 Mania a call, they might have spares available.
They supplied and fitted an NB8C torsen diff into my NB8B (3.9 vs 4.1) that didn't come with the gearbox sender, but they were able to source one from their spares.
They supplied and fitted an NB8C torsen diff into my NB8B (3.9 vs 4.1) that didn't come with the gearbox sender, but they were able to source one from their spares.
H@mmer - 1994 Clubman | 2002 SP
GO TOPLESS!!!
GO TOPLESS!!!
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 88 guests
