I purchased a 99 jap torsen + driveshaft for my NA and im trying to mate it up to my 6 speed. Im having issues getting the driveshaft into the box, the shaft looks bigger than the gbox end. Anyone have any ideas? I thought all the driveshafts were compatible?
Thanks in advance,
Driveshaft fitment issues with my 6 speed
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
rxmx
- Fast Driver
- Posts: 338
- Joined: Tue Dec 16, 2003 11:43 pm
- Vehicle: NA6 - Turbo
- Location: Sydney
Driveshaft fitment issues with my 6 speed
http://www.facebook.com/purefabcustom
EFR6758 run-in tune 259hp atw on 10psi pump 98 dyno dynamics
E85 tune - 445hp @ wheels 17psi
EFR6758 run-in tune 259hp atw on 10psi pump 98 dyno dynamics
E85 tune - 445hp @ wheels 17psi
-
pcmx5
- Racing Driver
- Posts: 1648
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: ND - 2
- Location: Geelong Vic.
- Contact:
Driveshaft fitment issues with my 6 speed
Sorry I can't help you specifically but my 96 NA8A tailshaft fitted fine with my 6 speed, so I would have had the same opinion as you.
Peter.
Peter.
.Now ND2 Roadster prev NC2 Recaro's ,BBS wheels,full exhaust, Tiens NA 1.6.NA 1.8 LE(106RWKW)NC1,NC2.ND 1.5 .
-
bretauto
- Driver
- Posts: 62
- Joined: Mon Sep 01, 2008 2:23 pm
- Vehicle: NB8A - Turbo
- Location: Sydney, Wetherill Park
Driveshaft fitment issues with my 6 speed
Are the auto yokes the same as the manual?
-
rxmx
- Fast Driver
- Posts: 338
- Joined: Tue Dec 16, 2003 11:43 pm
- Vehicle: NA6 - Turbo
- Location: Sydney
Driveshaft fitment issues with my 6 speed
Thanks for the replies.
Peter did it go in easily or does it require some force?, I will attemp it again jus don't wanna damage my gbox seals...
Im not sure about auto/manual tailshafts, iv'e been trying to search it on the net, i know they are different lengths but unsure of the yoke.
Peter did it go in easily or does it require some force?, I will attemp it again jus don't wanna damage my gbox seals...
Im not sure about auto/manual tailshafts, iv'e been trying to search it on the net, i know they are different lengths but unsure of the yoke.
http://www.facebook.com/purefabcustom
EFR6758 run-in tune 259hp atw on 10psi pump 98 dyno dynamics
E85 tune - 445hp @ wheels 17psi
EFR6758 run-in tune 259hp atw on 10psi pump 98 dyno dynamics
E85 tune - 445hp @ wheels 17psi
-
pcmx5
- Racing Driver
- Posts: 1648
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: ND - 2
- Location: Geelong Vic.
- Contact:
Driveshaft fitment issues with my 6 speed
Slipped straight in.
Peter
Peter
.Now ND2 Roadster prev NC2 Recaro's ,BBS wheels,full exhaust, Tiens NA 1.6.NA 1.8 LE(106RWKW)NC1,NC2.ND 1.5 .
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 153 guests
