Page 1 of 1
Guard rolling Melbourne
Posted: Sun Sep 27, 2015 7:26 pm
by Juicy HiC
I'm looking to get my guards rolled and was wondering if anyone has had it done in Melbourne with good results?
Live in the western suburbs so would prefer that side of town but I'll go over the bridge if need be.
Sent from my SM-G928I using Tapatalk
Re: Guard rolling Melbourne
Posted: Mon Sep 28, 2015 12:26 am
by fastfreddygassit
Just a thought....
If you have the time, it's worthwhile doing it yourself.
Guard rollers and heat guns are (relatively) inexpensive, and as long as you have no bog/bodyfiller in your guards, and take your time, you will be fine.
Plenty of youtube instructional vids.
Both meanmx and I have rolled our guards on our NB's.
Re: Guard rolling Melbourne
Posted: Mon Sep 28, 2015 10:29 am
by Red Dragon
You could try this mob
www.wheelfixit.com.au/
Re: Guard rolling Melbourne
Posted: Mon Sep 28, 2015 11:07 am
by Juicy HiC
Thanks guys, I had found wheel fix it so may give them a call.
Freddy what size tyres did you do it for?
Sent from my SM-T705Y using Tapatalk
Re: Guard rolling Melbourne
Posted: Mon Sep 28, 2015 2:15 pm
by fastfreddygassit
I initially did it for the stock racing harts and the 205/40-17 but with 25mm spacers.
I have since gone to an 8.25 rim +25 with 205/40 and 205/45 and it is mint.
I also have modified guard liners where meanmx just removed his.
I am low(ish) too....
Re: Guard rolling Melbourne
Posted: Mon Sep 28, 2015 6:41 pm
by Juicy HiC
Thanks
Sent from my SM-G928I using Tapatalk