Page 1 of 1
DIY Dash Removal
Posted: Thu Aug 09, 2012 6:35 pm
by chino
Hey guys,
i recently took out my dash and needed some help, so i came across this PDF.
I dont take any credit, as all goes to Anthony Meeks for his effort and time from miata.net
http://www.miata.net/garage/DashRmv_89_93.pdfsaved me a lot of time so i thought i'd share
Re: DIY Dash Removal
Posted: Mon Aug 20, 2012 8:18 pm
by mrpham
Pretty detailed write up there.
I've taken dashes out over a dozen times now, only things I would add to that would be to keep the HVAC controls in the dash and remove later, unclip all the cable terminals before you even start to pull the dash out.
Re: DIY Dash Removal
Posted: Thu Aug 23, 2012 3:56 pm
by chino
good point!
Ive taken the dash out for a while now, and forgot which way the two green wires go ( im assuming its to work the AC), i havent started the car yet but ive put the Green/Red wire on the top terminal and the other on the bottom.
Right or wrong? LOL
Re: DIY Dash Removal
Posted: Thu Aug 23, 2012 4:13 pm
by mrpham
chino wrote:good point!
Ive taken the dash out for a while now, and forgot which way the two green wires go ( im assuming its to work the AC), i havent started the car yet but ive put the Green/Red wire on the top terminal and the other on the bottom.
Right or wrong? LOL
It shouldn't really matter because it's just a switch that it goes to.
Re: DIY Dash Removal
Posted: Thu Aug 23, 2012 5:57 pm
by chino
Sweet as man
btw thanks for the plate holder, arrived last week