Page 1 of 1
seat belt bolt thread and length
Posted: Fri Jun 15, 2012 9:36 am
by plohl
Hi,
Need this info pretty urgently and haven't been able to find it from my quick searches on the web and through the service manual.
What is the seat belt and seat belt stalk (receiver) thread? I have a feeling it is m12 x 1.25 but i am not sure. These are the bolts that thread into the body.
If anyone knows - it would be greatly appreciated.
Re: seat belt bolt thread and length
Posted: Fri Jun 15, 2012 9:48 am
by jlo8872
Dude,
The thread is a specific one; I don't know the exact details; but years ago when I was builiding a kit car I ran into this problem.
Your Main roads people would know for sure.
Are you looking to tap a thread? If so you will need to order the tap from a supplier; they are expensive and speacial order.
J.
Re: seat belt bolt thread and length
Posted: Fri Jun 15, 2012 9:55 am
by plohl
nah - i am chasing some eye bolts to thread into it for a harness.
Wouldn't have this issue if the harness had bolt on plates!
Re: seat belt bolt thread and length
Posted: Fri Jun 15, 2012 10:21 am
by TonyMax
Your local race supplier should have these eye bolts with the correct thread. Revolution Racegear or equivalent. All the eye bolts I've ever had have been the correct seat belt thread.
Re: seat belt bolt thread and length
Posted: Fri Jun 15, 2012 12:06 pm
by plohl
It is 7/16 unf
cheers
Shane
Sent from my GT-I9100T using Tapatalk 2
Re: seat belt bolt thread and length
Posted: Fri Jun 15, 2012 12:48 pm
by Mr Morlock
if its a standard part Mazda should be able to supply it or at least advise the spec.
Re: seat belt bolt thread and length
Posted: Fri Jun 15, 2012 1:45 pm
by plohl
yeah, was going to call mazda this arvo if i hadn't found out.
Re: seat belt bolt thread and length
Posted: Fri Jun 15, 2012 2:03 pm
by TonyMax