Door Panel Trim Mounts and Plastic Sheet
Posted: Mon May 28, 2012 7:55 pm
Hi guys,
Long story short: I have a few questions in relation to the door trim on an NB8B.
- Are replacements available for the 2 yellow plastic clips (in picture to the right and below the door handle) which align the screws for the door pull on the door card?
- Can replacement plastic rain sheets be purchased? (I searched this but couldn't seem to find anything?)
Here's a picture to explain what I mean by the yellow plastic clips.
Short story long:
I was made aware a few weeks ago when I had my tint re-done that my drivers side door had taken a battering by either the previous owner or mechanic. It wasn't until last week when I self-installed a set of Focal 8" component speakers that I saw what he meant.
First of all, the plastic sheets which provide water protection are all torn and mis-aligned (black goop everywhere...). Secondly (and most annoyingly), the 2 bolt points which secure the door card at the top and bottom of the door pull are missing their yellow plastic clips/housings (identified on my good passenger door in the picture above).
It seems the previous owner or mechanic has made do without these and just bolted the door card straight in, disfiguring the mounting point (making it near impossible to grip/tighten the bottom screw) and causing alignment issues to the door card itself. Now the door card sits skewed, higher towards the back, and the plastic trim clips in the door wells don't align.
Has anyone had similar experiences and can offer a solution?
Any advice would be greatly appreciated (it's amazing how such small imperfections can annoy you!!!)
Long story short: I have a few questions in relation to the door trim on an NB8B.
- Are replacements available for the 2 yellow plastic clips (in picture to the right and below the door handle) which align the screws for the door pull on the door card?
- Can replacement plastic rain sheets be purchased? (I searched this but couldn't seem to find anything?)
Here's a picture to explain what I mean by the yellow plastic clips.
Short story long:
I was made aware a few weeks ago when I had my tint re-done that my drivers side door had taken a battering by either the previous owner or mechanic. It wasn't until last week when I self-installed a set of Focal 8" component speakers that I saw what he meant.
First of all, the plastic sheets which provide water protection are all torn and mis-aligned (black goop everywhere...). Secondly (and most annoyingly), the 2 bolt points which secure the door card at the top and bottom of the door pull are missing their yellow plastic clips/housings (identified on my good passenger door in the picture above).
It seems the previous owner or mechanic has made do without these and just bolted the door card straight in, disfiguring the mounting point (making it near impossible to grip/tighten the bottom screw) and causing alignment issues to the door card itself. Now the door card sits skewed, higher towards the back, and the plastic trim clips in the door wells don't align.
Has anyone had similar experiences and can offer a solution?
Any advice would be greatly appreciated (it's amazing how such small imperfections can annoy you!!!)