I've always had issues with the OEM blades... a few days after a car wash, the blades will start squeaking, especially on the highway.
Has anyone used aftermarket ones like these?
http://ecommerce.mossmotors.com/p/miata-mx-5/miata-exterior/wipers---washers/sporza-wiper-blades-by-piaa---driver-side/103-160
http://ecommerce.mossmotors.com/p/miata-mx-5/miata-exterior/wipers---washers/piaa-silicone-wiper-blades---driver-side/101-210
http://ecommerce.mossmotors.com/p/miata-mx-5/miata-exterior/wipers---washers/curved-silicone-wiper-blades-by-piaa/904-882-MIA-1
*And what's the difference between the 3? (is that aero-wing a gimmick?)
Has anyone tried these wiper blades?
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
- Racing Driver
- Posts: 1364
- Joined: Fri Jun 12, 2009 12:10 pm
- Vehicle: NB SP
- Location: Sydney
-
- Fast Driver
- Posts: 423
- Joined: Thu May 19, 2011 11:10 am
- Vehicle: ND - 2
- Location: brisbane
Re: Has anyone tried these wiper blades?
Hi
Haven't tried those. I buy mine from Bursons- not in a packet and made by Tridon or Trico cannot remember which one. They keep them out the back and they have a grey finish on the blade. Cost less than $8.00 for the pair and they are great in wiping and longevity. One of the best i have ever used.
Haven't tried those. I buy mine from Bursons- not in a packet and made by Tridon or Trico cannot remember which one. They keep them out the back and they have a grey finish on the blade. Cost less than $8.00 for the pair and they are great in wiping and longevity. One of the best i have ever used.
-
- Racing Driver
- Posts: 1364
- Joined: Fri Jun 12, 2009 12:10 pm
- Vehicle: NB SP
- Location: Sydney
Re: Has anyone tried these wiper blades?
Thanks Ralt... where would you source them from?
And it's not the 'flexi-blade' I'm guessing?...
And it's not the 'flexi-blade' I'm guessing?...
-
- Driver
- Posts: 75
- Joined: Tue Jun 15, 2010 6:06 pm
- Vehicle: NB8A
- Location: Bundanoon
Re: Has anyone tried these wiper blades?
I use the ones from costco they were on special last time we were there thought I couldn't miss for $4 ea and they work a treat.
- Okibi
- Speed Racer
- Posts: 10901
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
Re: Has anyone tried these wiper blades?
I have similar looking repco branded ones on the people mover, no idea about that aero-wing thing but they seem to work fine.
If you had access to a car like this, would you take it back right away? Neither would I.
- Stoogey
- Driver
- Posts: 98
- Joined: Wed Sep 28, 2011 1:29 am
- Vehicle: NB8A
- Location: Sydney!
Re: Has anyone tried these wiper blades?
I am currently using ones from costco as well. I was so impressed with them i ended up buying a set for my mums and the missus' car as well.
They are Goodyear Assurance branded and are frameless.
They are Goodyear Assurance branded and are frameless.
-
- Racing Driver
- Posts: 1364
- Joined: Fri Jun 12, 2009 12:10 pm
- Vehicle: NB SP
- Location: Sydney
Re: Has anyone tried these wiper blades?
What's the brand of the ones from Costco...?
And do they flop around on the highway (while the wipers are on)
And do they flop around on the highway (while the wipers are on)
-
- Driver
- Posts: 75
- Joined: Tue Jun 15, 2010 6:06 pm
- Vehicle: NB8A
- Location: Bundanoon
Re: Has anyone tried these wiper blades?
Have not tried them in the wet at speed as yet.
-
- Speed Racer
- Posts: 3511
- Joined: Thu May 19, 2011 3:38 pm
- Vehicle: NA8
- Location: Brisbane
Re: Has anyone tried these wiper blades?
Try rain ex. Reduced need for wipes. I just run the repco ones from "out the back".
Sent from my GT-I9100 using Tapatalk
Sent from my GT-I9100 using Tapatalk
- Stoogey
- Driver
- Posts: 98
- Joined: Wed Sep 28, 2011 1:29 am
- Vehicle: NB8A
- Location: Sydney!
Re: Has anyone tried these wiper blades?
BadBong wrote:What's the brand of the ones from Costco...?
And do they flop around on the highway (while the wipers are on)
Brand is goodyear.
110km/h from liverpool to picton (only highway ive tried it on) shows no signs of flopping around.
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 235 guests