mx5cartalk.com

My dad took my car to his mates shop to get a roady, came back and the gearknob won't budge Feels like its glued or something. Any ideas to get it off? I was thinking of heating it with a hairdryer to loosen the glue; if there is any.

Is it MOMO?

If it is there are screws at the base, the momo metal ring at the base turns clockwise.

luke__ wrote:My dad took my car to his mates shop to get a roady, came back and the gearknob won't budge Feels like its glued or something. Any ideas to get it off? I was thinking of heating it with a hairdryer to loosen the glue; if there is any.

Some Nardi ones also have an allen key needed to remove the knob.

I had one stick once and just kept wiggling it side to side until it came loose.

Nah its the stock one. I took it off the other week but now its stuck. Maybe they used loctite I hope not.
Found this thread with a bit more searching viewtopic.php?f=28&t=40838 and i'm now looking for one of those rubber things. I know i have one around somewhere.

Rubber gloves can be handy for getting a good grip on something (using it as a rubber sheet, or as a glove) - with your hand or with a vice grip etc.

CHRISTolo wrote:Is it MOMO?

If it is there are screws at the base, the momo metal ring at the base turns clockwise.

I assume that is clockwise when looking from above?

Get a rag wrap it around.

Get locking pliers.

Lock and turn with a mallet i hav same issue with stock knob never came off.

And ofcourse before re installing gearknob lubricate that bastard lol

Sent from my GT-I9100T using Tapatalk

Finally got it off. Turns out it wasn't glued but just done up tragically tight. Got it loose with a piece of nonslip placemat/cupholder stuff. I think they use them under rugs aswell, Kinda like a foam net thing.