Page 1 of 1
NB8B Front bar
Posted: Fri Aug 26, 2011 2:39 pm
by 25GTV
I have a 99 mx5 and want to swap the front to the 2001 shape... What parts will i need? Front bar, head lights and???
Also where is a good place to source these parts?
Cheers guys
Re: NB8B Front bar
Posted: Fri Aug 26, 2011 4:49 pm
by Regie
they are expensive
bur front bar, headlights and possibly the rio behind the bar.
i also have a feeling that the bonnets could be slightly different also
Re: NB8B Front bar
Posted: Fri Aug 26, 2011 5:09 pm
by de Bounce
Regie wrote:I also have a feeling that the bonnets could be slightly different also
NM8A and NB8B bonnets are the same, discussed and confirmed
HERE
Re: NB8B Front bar
Posted: Sun Aug 28, 2011 8:52 am
by slimx
Everything you need is listed below
- headlights (viewtopic.php?f=44&t=48452) (from me) (NB8B/NB8C)
- front bumper (NB8B/NB8C)
- taillights (they are also different) (NB8B/NB8C)
---
Headlights lets say $350 - $500 depending on condition etc...
front bar $250 - 350
taillights - $150 - 250
======
Do the math urself
Re: NB8B Front bar
Posted: Sun Aug 28, 2011 8:55 am
by slimx
oh and the badge is bigger on the bumper
Re: NB8B Front bar
Posted: Sun Aug 28, 2011 9:23 pm
by lightyear
You will need to change the plastic inner guards and the wiring and plugs are different.
Re: NB8B Front bar
Posted: Sun Aug 28, 2011 11:42 pm
by slimx
wiring 10min job just buy some wiring for $10.
All you need is ...
9006 Bulb low beam
a high beam bulb, you just have to wire the high beam up cause its seperate
Plastic inner guards should either come with the bumper or just dont use any.. who cares. Move your intake there.. better cold air lol and for the driver side.. its all metal anyway.. u dont need a guard