Page 1 of 1
HARD DOG ROLL BARS
Posted: Sun Apr 17, 2011 7:37 am
by mr2 spyder
Just looking at one of these for the mr2 and see they do ones for the mx5s also. wondering if anyone has one and opinions on them?
Re: HARD DOG ROLL BARS
Posted: Sun Apr 17, 2011 1:51 pm
by Hjt
Most members purchase the local Brown Davis Roll bar which is essentially the same thing. This is various posts if you wish to search for it in the top right corner.
Im currently awaiting my single hoop hard dog bar. Ill post a picture when i have it
Re: HARD DOG ROLL BARS
Posted: Sun Apr 17, 2011 4:30 pm
by snshami
I was looking at the hard dog roll bar and the reason I left it alone was the way it needs to be installed requires a bit too much of a tear up. One has to unstitch a flange on the seat belt tower and cut part of the fuel tank cover off. The reason is that the hard dog bars go further down in the vehicle and bolt onto the rear floor and the lower part of the seatbelt tower. The Aussie bars bolt on the top and side of the seat belt tower and the rear of the parcel shelf.
The MX-5 TB bars compensate by including a torque box that the US part does not have.