Bonnet Dents Fixed
Posted: Sun Jan 16, 2011 5:53 pm
I have read on here that fixing bonnet dents in the aluminium is tricky, but if anyone knows of any good dent removal guys on the North Shore (Sydney) or Gosford area i would appreciate it.
Basically i have had this pretty bad dent since i bought the car, about 1 inch long and it is at the front of the drivers side bonnet where (i think) some knob reversed a tow bar into the car , and its directly above the bulbous area of the bonnet when you open it, so either way it needs a drill hole to get to.......of course! There are also 2 small stone chip dents in the middle of the bonnet.
I also have a vertical dent down my door, about 5 or 6 inches and shallow, which occurred when a bluescope steel gate blew shut on it.
I also have several small carpark dents on both sides of the car on the back panel and drivers door.
Am i pushing my luck at dent removal here, or am i best off just waiting for a wrecked car and nabbing a bonnet and door?
If you have successfully had several dents removed please let me know who you used and how much it cost etc.
Cheers.
Basically i have had this pretty bad dent since i bought the car, about 1 inch long and it is at the front of the drivers side bonnet where (i think) some knob reversed a tow bar into the car , and its directly above the bulbous area of the bonnet when you open it, so either way it needs a drill hole to get to.......of course! There are also 2 small stone chip dents in the middle of the bonnet.
I also have a vertical dent down my door, about 5 or 6 inches and shallow, which occurred when a bluescope steel gate blew shut on it.
I also have several small carpark dents on both sides of the car on the back panel and drivers door.
Am i pushing my luck at dent removal here, or am i best off just waiting for a wrecked car and nabbing a bonnet and door?
If you have successfully had several dents removed please let me know who you used and how much it cost etc.
Cheers.