Page 1 of 1
Removing Door Sills on an NB
Posted: Mon Jul 28, 2008 3:11 pm
by tuned_to_fly
Howdi. Could someone please post up how exactly to remove the door sills on a 98 NB. I'm sure its fairly easy to do but I always like to check before I go trying things for the first time.
Ive tried searching and I cant find any posts or an online workshop manual anywhere... If someone knows the whereabouts of an online manual that would be great too - don't really feel the need to pay $100 for one when I had online versions for my previous cars.
Thanks in advance for your help
Brad
Re: Removing Door Sills on an NB
Posted: Mon Jul 28, 2008 3:26 pm
by 16bit
i think its just 5 or so screws from memory and it just pulls off.
Re: Removing Door Sills on an NB
Posted: Mon Jul 28, 2008 3:54 pm
by Garry
No screws on the NB sills, they just clip on. Grab hold of it, it's a little easier to get your fingers under it on the carpet side, and pull straight up.
Re: Removing Door Sills on an NB
Posted: Mon Jul 28, 2008 5:22 pm
by Mr Morlock
You are I assume talking about sill scuff plates. Screws holding in place are visible. The sills are part of your body structure and are welded in place. Removal and replacement of a sill may occur as a result of crash damage.
Re: Removing Door Sills on an NB
Posted: Mon Jul 28, 2008 5:26 pm
by Mr Morlock
whoops - no screws on NB P2 -Garry is right.
Removing Door Sills on an NB
Posted: Tue Jul 29, 2008 10:57 pm
by RG.net
nb sills are just clips, get your hands under it, one on each end and pull, it should just pop out.
Removing Door Sills on an NB
Posted: Wed Jul 30, 2008 2:19 pm
by tuned_to_fly
Thanks for the replies everyone. Def just clips.
Removing Door Sills on an NB
Posted: Wed Jul 30, 2008 3:29 pm
by wun911
Oh thats kinda easy to remove