voodoo knob from mx5 mania

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

atomic
Driver
Posts: 87
Joined: Thu Aug 12, 2004 2:53 pm
Vehicle: NA6
Location: Sydney
Contact:

voodoo knob from mx5 mania

Postby atomic » Wed Aug 15, 2007 12:18 pm

Does anyone know how much they charge for the standard spun aluminium knob? The website just says 'from $60' and no one is picking up the phone...

Thx

User avatar
Bevan
Speed Racer
Posts: 2599
Joined: Tue Nov 16, 2004 8:18 pm
Vehicle: ND - 2 GT
Location: N-West Sydney

Re: voodoo knob from mx5 mania

Postby Bevan » Wed Aug 15, 2007 12:38 pm

atomic wrote:Does anyone know how much they charge for the standard spun aluminium knob? The website just says 'from $60' and no one is picking up the phone...

Thx
I'm not so sure if they can get them anymore. :frown: Send them an email or just keep trying on the phone. They've got a couple of extra guys there for the phone and over the counter stuff now so they were probably dealing with a customer on the phone or in the shop at the time. :)

User avatar
Ajay
Racing Driver
Posts: 901
Joined: Mon Dec 11, 2006 6:07 pm
Vehicle: NA6
Location: Western Sydney, NSW
Contact:

Postby Ajay » Wed Aug 15, 2007 12:39 pm

they had them when i was there a few weeks back..
Image

Muzdaman
Fast Driver
Posts: 453
Joined: Mon Apr 23, 2007 5:00 pm
Vehicle: NA6
Location: Newcastle

Postby Muzdaman » Wed Aug 15, 2007 2:27 pm

I think they are about $100 - $110 ish.

My piano black one was $60.00

atomic
Driver
Posts: 87
Joined: Thu Aug 12, 2004 2:53 pm
Vehicle: NA6
Location: Sydney
Contact:

Postby atomic » Wed Aug 15, 2007 2:41 pm

Hmm... ok thanks. I'll check with them again but if it's in the $100 ball park then I might order online instead

User avatar
sliq
Speed Racer
Posts: 3414
Joined: Sat Jan 13, 2007 12:33 am
Vehicle: ND - 2 GT
Location: Sydney
Contact:

Postby sliq » Wed Aug 15, 2007 4:20 pm

does anyone remember the thread measure for the mx5 gear knob?
i can't brain today.. i have the dumb..

User avatar
green_comet
Car Detailing Guru
Posts: 1848
Joined: Tue May 24, 2005 1:41 am
Vehicle: NA8
Location: Melbourne

Postby green_comet » Wed Aug 15, 2007 6:10 pm

I would go for the Magnum Voodoo over the standard one, it just a little too small..

Fatty
Speed Racer
Posts: 3175
Joined: Fri Feb 03, 2006 10:39 am
Vehicle: NA6
Location: Melbourne

Postby Fatty » Wed Aug 15, 2007 6:14 pm

this might sound like a dumb question, but does the knob get hot to the touch at all? i know when i touch the actual gear stick on my car it is often very hot. so i figure if a etal knob is attached to this, then that would heat up too ? ? currently with the plastic / leather knob this is not an issue.

User avatar
PUR157
Racing Driver
Posts: 967
Joined: Sun Sep 17, 2006 5:26 pm
Vehicle: Clubman
Location: Sydney, Capital of Australia
Contact:

Postby PUR157 » Wed Aug 15, 2007 6:27 pm

This is what I got... a forum buy through OzHonda contacts... hehe
Its the Razo RA42/43 (whichever is the gunmetal one)

Image

It's metal... and I can feel the heat through the transmission tunnel too when I put my hand on the gear boot... but somehow when it comes to the knob... it's still cool to the touch! Maybe it has something to do with the plastic collar?
Oneness of Man and Machine
Image

User avatar
Mr_Q
Racing Driver
Posts: 814
Joined: Tue Aug 10, 2004 4:41 pm
Vehicle: NB SE
Location: Sydney, Australia
Contact:

Postby Mr_Q » Wed Aug 15, 2007 7:16 pm

They used to be around $95 for the Voodoo Magnum. They also used to take a while to come in and sell out in a couple of days. :)

I don't imagine things have got any less busy since I was there, so if the phone isn't answered ... leave a voice mail.

The knobs do get a bit warm in the sun and cold on a winter morning, but not unbearably so.

Oh, and they're really, really nice to use. :D
Mister Q
Had: Red 2004 SE, Red 1993 NA8 Clubman, Green 1991 NA6 LE

User avatar
chrislevingston
Fast Driver
Posts: 171
Joined: Sat May 03, 2003 11:00 am
Vehicle: ND - 2 GT
Location: Adelaide
Contact:

Postby chrislevingston » Wed Aug 15, 2007 7:21 pm

I have a Voodoo Magnum, and it fills your hand better than the tiny NA6 one - which used to make the palm of my hand ache after a spirited (read \"lots of gear changes\") lunchtime run in the Adelaide Hills.

Chris
1990 "TOY MX5" - Red, of course!
Kings, Konis, LSD, Genie system, grille, Voodoo knob, braces, 14 degrees ATDC, woodgrain dash,style bars and lots of work making the rubber bands go around faster.

User avatar
Andy Wana
Fast Driver
Posts: 362
Joined: Tue Sep 26, 2006 11:16 pm
Vehicle: ND - 2 GT
Location: Sydney, Australia

Postby Andy Wana » Wed Aug 15, 2007 8:51 pm

Atomic, I have the Voodoo spun aluminium knob for my MX5
It looks and feels great but the brushed effect on the knob do wear off since it is not protected/coated (wear and tear)
I got mine online from Team Voodoo since Mania was out of stock at the time

If you want a relatively cheap knob with the same looks/feel, you can go for the APX titanium gear knob
It's supposed to be made out of real titanium (oooh .... ahhhh) and it has the burnt-exhaust-tip-rainbow (I made that word up) look
I think it retails for $50 last time I read it in another forum

Image

Image

Image
I ♥ asymmetry

atomic
Driver
Posts: 87
Joined: Thu Aug 12, 2004 2:53 pm
Vehicle: NA6
Location: Sydney
Contact:

Postby atomic » Thu Aug 16, 2007 3:05 am

Yeah I saw that other thread and looks good for the price but most ppl seem to suggest the voodoo for the mx5.

The thing is, it looks like it can be purchased for similar money if buying online so I guess I'm wondering what makes the voodoo so desirable compared to other similar ones out there?

Suggestions?

User avatar
jules
Guitar Hero
Posts: 3562
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NA6
Location: Sydney, previously HQ - GC Dodgy Inc.
Contact:

Postby jules » Thu Aug 16, 2007 11:16 am

It's the power of the chicken.
I stole Wayne's magnum knob, but I didn't like it as much as my smaller one so gave it back to him.

It's all personal preference.

Jules
Founder of the Gold Coast Chapter of the Honourable Brothers of Dodgy.
Image

User avatar
Ajay
Racing Driver
Posts: 901
Joined: Mon Dec 11, 2006 6:07 pm
Vehicle: NA6
Location: Western Sydney, NSW
Contact:

Re:

Postby Ajay » Thu Aug 16, 2007 12:47 pm

Andy Wana wrote: and it has the burnt-exhaust-tip-rainbow (I made that word up)


:lol: :lol: :lol:
Image


Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: No registered users and 55 guests