Shecks drift damage

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

Sheck
Racing Driver
Posts: 550
Joined: Thu Apr 29, 2004 9:54 am
Vehicle: ND - 2 GT
Location: South East Brisbane

Shecks drift damage

Postby Sheck » Thu Mar 22, 2007 3:48 pm

Hey guys, if you havent read i mentioned in another thread that i hit a wall last sat at the drifts.
The reason this happened was due to 50% sh*t driving and 50% car setup totally wrong. Put on some Pirelli 6000 tyres on the back and had set at 32psi, they felt ok so i thought i didnt have to go soft on my first run.

Comming into turn 3 (national track) at QR 3rd gear (6 speed box plus 4.3 rear end) i scando flick the car as usual into the corner but instead of the car flicking back into the direction of the corner it just understeered right into the wall, i managed to bring the car around a little so most of the impact was on the drivers side front/corner section instead of full frontal.

Car is ok, all engine related parts came off scott free so i was lucky. But the front dirvers parker light setup was smashed, tow hook pushed back which also bent a small section of the chassis rail and some other metal. Most of the pannels dont line up properly anymore :cry:
Here are some pics:

front damage
Image

gaurd
Image

chassis
Image

Dave

User avatar
Boags
Speed Racer
Posts: 3533
Joined: Thu Nov 10, 2005 6:25 pm
Vehicle: NB SP
Location: Brisvegas
Contact:

Postby Boags » Thu Mar 22, 2007 3:59 pm

:cry:

Ouch, that sucks! Hopefully it isn't an expensive fix! :?

When in the passenger seat a couple of weeks back my bum slammed shut a couple of times, cause I thought that was going to happen. It's a pity you couldn't pull out of this one.

I wish you a speedy recovery!

Boags
Spartan Motor Sport : http://www.SpartanMS.com.au

Sheck
Racing Driver
Posts: 550
Joined: Thu Apr 29, 2004 9:54 am
Vehicle: ND - 2 GT
Location: South East Brisbane

Postby Sheck » Thu Mar 22, 2007 4:05 pm

Yea cheers mate, i may just leave it as is (i'm looking for a parker light assembly atm) if the damage doesnt affect the alignment, but i'll prolly get around to fixing it somewhere down the line - after i get the rest of the car sorted. Need a new turbo and to get my comp tuned, someone buy my wheels!!!!


Dave

MonSqueek

Postby MonSqueek » Thu Mar 22, 2007 4:23 pm

Awwww poor Cyclone :cry: .... though it does look cool in a frankenstien kinda way with the \"scars & sutures\" look.

Fatty
Speed Racer
Posts: 3175
Joined: Fri Feb 03, 2006 10:39 am
Vehicle: NA6
Location: Melbourne

Postby Fatty » Thu Mar 22, 2007 4:33 pm

bummer! :(

User avatar
irwin83r
Racing Driver
Posts: 1563
Joined: Wed Feb 25, 2004 8:32 pm
Vehicle: NB8A
Location: wollongong
Contact:

Postby irwin83r » Thu Mar 22, 2007 7:45 pm

leave it :D

looks very mean.. all stitched up hehe.


only cosmetic damage so its all sweet

User avatar
StanTheMan
Forum legend
Posts: 6824
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NA6
Location: Balgowlah

Postby StanTheMan » Thu Mar 22, 2007 8:00 pm

Love the stitching. :lol:

The minimum your up for is a new
front bumper
bonnet
& Light cover.
front guard
indicator


Looks like you might have to employ a winch, large tree & a shed to pull out the tow hook
Satans Ride called F33nix the resurrected NA6

Sheck
Racing Driver
Posts: 550
Joined: Thu Apr 29, 2004 9:54 am
Vehicle: ND - 2 GT
Location: South East Brisbane

Postby Sheck » Thu Mar 22, 2007 8:00 pm

a little bit more than cosmetic, but the chassis i'll prolly leave if its not affecting anything and just try to get everything else to line up better.
I'll paint over the scratch marks (VIP pet foods add on the wall) and the zip ties just to get it looking complete again.

From day one i figured i'd get nothing in return (money wise) from this car and now i have every reason to keep it at least as a track car! Good news for me!!

Dave

User avatar
Old EmmGee
Driver
Posts: 74
Joined: Sat Feb 03, 2007 10:25 am
Vehicle: ND - 2 GT
Location: Adelaide Hiills

Postby Old EmmGee » Thu Mar 22, 2007 10:53 pm

I agree with the comments you should keep it like that - looks really kinky with the stitching...........plus you'll only be upset if it happened again...
MX5-less; need another!

User avatar
PUR157
Racing Driver
Posts: 967
Joined: Sun Sep 17, 2006 5:26 pm
Vehicle: Clubman
Location: Sydney, Capital of Australia
Contact:

Re:

Postby PUR157 » Thu Mar 22, 2007 11:20 pm

MonSqueek wrote:Awwww poor Cyclone :cry: .... though it does look cool in a frankenstien kinda way with the "scars & sutures" look.


Haha... I was gunna say... Zombie lookin :shock:

But hey... doesnt stuff like that get you cred in drifting circles?
Battle scars :)

At least it beats getting backed into by a Camry at Woollies...!

But on a more serious note... Glad to see (hear) no one was hurt!
Oneness of Man and Machine
Image

99MXV
Racing Driver
Posts: 1713
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: ND - 2 GT
Location: Toowoomba

Postby 99MXV » Fri Mar 23, 2007 8:13 am

Someone has to say it..............

HAVE YOU TRIED TO BUFF IT OUT YET ???
:lol:
Won't be long now... On the hunt for an MX5

User avatar
Benny
Speed Racer
Posts: 2607
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NB SP
Location: Gorgeous Sydney
Contact:

Postby Benny » Fri Mar 23, 2007 8:55 am

Shame about ruining that nice new paintwork Sheck.

Don't you just hate understeer?
Image
ALWAYS RUNNING, SP with Bilstein Coil Overs and Doof Doof sound. Member of the Fat Bastards Racing Team

User avatar
MasterZ
Fast Driver
Posts: 254
Joined: Tue Oct 24, 2006 8:47 pm
Vehicle: NA6 - Turbo
Location: Albion Park Rail (Near Wollongong)

Postby MasterZ » Fri Mar 23, 2007 9:23 am

looks nasty sheck,
btw what type of front bumper is it that, cause its not sock but its a good design?
1992 Mazda MX5 Turbo | 2004 VW Golf GTI | 2010.5 VW R36 Passat Wagon | 1985 Mazda HBES 929 13b Turbo | 1987 Mazda RX7 FC3S Turbo | KE20 Corolla Coupe

User avatar
jules
Guitar Hero
Posts: 3562
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NA6
Location: Sydney, previously HQ - GC Dodgy Inc.
Contact:

Postby jules » Fri Mar 23, 2007 10:48 am

Racing Beat Type II?

Jules
Founder of the Gold Coast Chapter of the Honourable Brothers of Dodgy.
Image

Sheck
Racing Driver
Posts: 550
Joined: Thu Apr 29, 2004 9:54 am
Vehicle: ND - 2 GT
Location: South East Brisbane

Postby Sheck » Fri Mar 23, 2007 5:12 pm

It came from japan so i'm 90% sure its a HKS kansai front bar, i doubt an imported US front nose would be cheaper over there but either way there are another 2 or 3 companies that make the same looking bar as the Racing Beat type 2.

Yea the 'battle scars' are kinda over the hill now cause alot of ricers started to buy brand new bodykits just to break them and stich them back up for that drifted look.
The stiches will stay but will most likely be painted over eventualy.

Cheers guys!!
Dave

PS someone buy my wheels please :mrgreen:


Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: No registered users and 35 guests