Page 1 of 1

Posted: Tue Jul 25, 2006 3:19 pm
by Garry
After you undo the screws pull it towards you. It's held in place by a few clips. But be careful, the plastic has probably gone brittle and it may crack.

Changing the instrument light colour isn't very easy because the lettering on the gauges has a green backing on the underside.

Posted: Tue Jul 25, 2006 5:15 pm
by Lucky_Luke
Yeah i learnt that the hard way and cracked a piece off the back of mine.. :cry:

oh well wasnt too hard to fix..
But after taking it out i squashed the clips with a pair of pliers so they didnt retain their vice-like grip on my dash, now it pops out nicely with a little pull..

Garry's right about the green backing though as I was looking to do the same thing... the only thing i was able to do was change it so all of my gauge needles glowed bright white.. which looks pretty cool anyway on the green backing IMO, well something different at least..

Posted: Tue Jul 25, 2006 10:08 pm
by Moggy
I swear it isn't possible to pull those three clips out without cracking the mounts. Everytime I have done it no matter how careful and aware I am I always break something... :roll:

Posted: Wed Jul 26, 2006 10:19 am
by Garry
I managed to get mine out without braking anything :P

Re:

Posted: Wed Jul 26, 2006 12:49 pm
by RaYmO
sharyl wrote:How hard is the backing to get off, i'd love to change mine to blue but have sorta been to lazy to try it :oops:


I remember reading a most on miata.net from a member who had used acetone and a cotton bud to wipe away the green at the back of the lights...

Im a bit hesitant to try that... acetone on plastic spells trouble for me...

Posted: Wed Jul 26, 2006 12:50 pm
by RaYmO

Posted: Fri Jul 28, 2006 10:23 am
by shelleriffic
Yeah I'd love to change the horrible green lighting to a nice red to match my CD player face and my paint 8)

Posted: Fri Jul 28, 2006 10:49 am
by jules
I love the green with black dials. It's kinda, late 80's....funny that.
I changed the tuner to suit the globes :D :D :D

Jules

Re:

Posted: Fri Aug 04, 2006 4:21 pm
by RaYmO
sharyl wrote:thanks raymo.... acetone sounds a little scary so i'll have to think about it


I just came across this site that recommends a product called "goof-off"

Image


Its a great site and also shows a step by step guide on how to remove the instrument dome / gauges.


http://www2s.biglobe.ne.jp/~AWD/teoutline.html

Hope it helps

Instrument Cluster Dome Removal

Posted: Tue Jun 02, 2009 11:34 pm
by Hammer
initial_mx5 wrote:...1. How in the hell do i remove my instrument cluster dome? Ive located the 2 screws under it but it doesnt seem to wanna come off after i have removed them?


Here's a pictorial step-by-step guide on how to remove the dashboard of an NA, taken from miata.net

Instrument Cluster Dome Removal

Posted: Thu Jun 04, 2009 4:54 pm
by doogle
i'm in the same boat as initial_mx5
tcoo or lucky luke, do you have any pics of what yours look like now?

Instrument Cluster Dome Removal

Posted: Thu Jun 04, 2009 5:03 pm
by Jeo
Check the date on the first few posts Doogle, I'd be surprised if they are still active members. There was a hell of a thread bump there somewhere.

Instrument Cluster Dome Removal

Posted: Thu Jun 04, 2009 9:05 pm
by doogle
i didn't see that!

oh well... still hopeful for some pics and ideas..

Instrument Cluster Dome Removal

Posted: Thu Jun 04, 2009 9:06 pm
by Hammer
initial_mx5 wrote:...2. My reason for removing them is that i wanna take a look at the lighting behind it. Is it possible to change it from the green to another colour without buying new gauge faces?

By the way i have a 1990 NA for those who dont remember (ive been out of action on the net for a while :P ).

Thanks everyone.


Yes, it is possible to replace the colour of the dashboard. LEDs are the answer. See the two threads below (NA & NB). The NB has more photos.

- NA Change Dash Lights Thread

- NB Change Dash Lights Thread


Here's a photo of an NB dash that was replaced with blue LEDs

Image