Page 1 of 1
Got some Meg's wax on my soft top, gone white
Posted: Fri May 19, 2006 3:46 pm
by maxwolfie
OK, I've got some wax on my black soft top, at the top of the windscreen pillar (along the edge where the top meets the windscreen...) It's gone all white yukky colour and I cant get it off (tryed scrubbing and stuff didnt work)
What will get it off.... ?
Posted: Fri May 19, 2006 3:52 pm
by Bevan
Do you want to show us? I'm sh!t bored so we can have a look now. I'll bring the black texta.
Posted: Fri May 19, 2006 4:07 pm
by bigdog
Get back to work both of you! Work those phones girls!
See this thread for more information!
http://www.aus-cartalk.com/viewtopic.php?t=19010&start=15
Posted: Fri May 19, 2006 4:48 pm
by Babalouie
I used a bristle brush (the soft kind for polishing shoes) and Meguiar's Vinyl Shine. The brush gets the Meguiars goop really deep into the grain of the top and scrubs the polish out.
Re:
Posted: Fri May 19, 2006 5:10 pm
by maxwolfie
Bevan wrote:Do you want to show us? I'm sh!t bored so we can have a look now. I'll bring the black texta.
Sorry man, i would.... but im being watched like a hawk..... ive been a bad boy this week
Posted: Fri May 19, 2006 6:42 pm
by FUN-29T
I used wheel cleaner and a hard bristle toothbrush.. But i also used masking tape and newspaper to cover the painted surfaces.
Posted: Sat May 20, 2006 6:25 pm
by Garry
I was at SCW today and noticed that they mask up all the black trim when they do the buff. I've never seen that done before. Some polish/waxes are really evil to black trim.
Re:
Posted: Sat May 20, 2006 7:14 pm
by Casey
Garry wrote:Some polish/waxes are really evil to black trim.
The good ones aren't
Posted: Mon May 22, 2006 5:10 pm
by jules
I've done this before. Just used Meguires Vinyl cleaner on it applied with one of their applicator pads.
Jules