Page 1 of 1
Another sill protector question
Posted: Wed Mar 01, 2006 12:41 am
by mightyrollaman
I tried to remove my stainless sill protectors the other day, expecting them to come free after removing the screws. They didn't. They seem to be glued down. Any tips for removing them without damage as I'm keen to have a look underneath them.
Cheers.
Posted: Wed Mar 01, 2006 8:26 am
by Garry
They are stuck with double sided tape. Get them nice and warm and prise up gently.
Posted: Wed Mar 01, 2006 8:59 am
by mightyrollaman
Cheers Garry.
Are there holes underneath allowing you to have a look inside the sill?
Posted: Wed Mar 01, 2006 9:58 am
by jules
Nope, just the screw holes. The chrome sill protectors were not standard on older models, therefor the sills were usually visible.
Jules
Posted: Wed Mar 01, 2006 10:01 am
by Garry
What Jules said
Posted: Wed Mar 01, 2006 2:02 pm
by OMY005
I just took the plastic trim off the sill and as well as the screw holes there is about 3 or 4 other holes large enough to see through into the sill area.
Andrew.
Posted: Wed Mar 01, 2006 2:04 pm
by jules
Hmmmmmm...I'm sure it hasn't been THAT long.
Jules
Re:
Posted: Wed Mar 01, 2006 8:04 pm
by mightyrollaman
OMY005 wrote:I just took the plastic trim off the sill and as well as the screw holes there is about 3 or 4 other holes large enough to see through into the sill area.
Andrew.
Just what I imagined. Thanks.