mx5cartalk.com

Hi again . hope i have the correct forum !!!!!!!! To remove eye ball vents . Rotate them 90 o and just pull them forward ?

You got the right place now spitty.

You need to pull the whole eyeball assembly out. If you have a look through this thread http://www.aus-cartalk.com/viewtopic.php?t=16319 you will get some clues and pictures.

See if that helps and let us know how you get on.

I used an old credit card and cut it about 2cm wide x2. Slid them in where the arrows are far enough to push the clip back and it popped out. Each one took me about a min to remove. Hope that helps.