Page 1 of 2
Part no's for NA6 import trim to aussie headunit install
Posted: Mon Nov 28, 2005 12:06 pm
by PASHN8
Hey lads,
I have seen a few part no's thrown around, but wanted to ask once and for all for the current part no's for the NA head unit surround and pocket for when you fit a single DIN aussie headunit into a import NA6CE.
I fitted one last night, as as expected the headunit doesn't sit flush with the trim surround, and the nice 1.5DIN gap underneath.
Just wanted to grab the '97 model (i think?) part no's for the replacement aussie trim surround and matching 1 DIN pocket to fit underneath.
Cheers,
Posted: Mon Nov 28, 2005 12:10 pm
by Craig
Mania sell them!
Re:
Posted: Mon Nov 28, 2005 12:16 pm
by Andrew
Craig wrote:Mania sell them!
Could get them sent down with my diff
Posted: Mon Nov 28, 2005 12:18 pm
by PASHN8
Ok, from Sabre's MX5 workshop site :
N041-55-210A00 - console fascia ($85)
B02A-66-9M0A - dash pocket ($9.90)
Are these current and correct?
(I think Mazda trade price would be cheaper, and easier as I can just pop down the road and grab it Craig, my headunit I fitted on the weekend is irritating me!:))
Re:
Posted: Mon Nov 28, 2005 12:54 pm
by Craig
Andrew wrote:Could get them sent down with my diff
*falls off chair at Andrew actually opening his wallet for once*
Re:
Posted: Mon Nov 28, 2005 12:56 pm
by Andrew
Craig wrote:Andrew wrote:Could get them sent down with my diff
*falls off chair at Andrew actually opening his wallet for once*
Posted: Mon Nov 28, 2005 1:11 pm
by Garry
You need to get the metal dividing bracket thingo as well. This goes across the double DIN hole to make 2 single DIN holes. It gives the head unit something to sit on and the dash pocket something to clip into to hold it in place.
Posted: Mon Nov 28, 2005 2:24 pm
by PASHN8
Aaaahh... serious? No mention of that on Sabre's site..
Anyone confirm the above part no's plug the metal dividing piece?
Posted: Mon Nov 28, 2005 3:36 pm
by Philip Lee
i don't have that metal thingy and it's fine.
u can see how it looks on page 2 of my cardomain.
Posted: Mon Nov 28, 2005 6:07 pm
by PASHN8
So does everyone concur that the parts to order from Mazda are :
N041-55-210A00 - console fascia ($85)
B02A-66-9M0A - dash pocket ($9.90)
Just want to double check before ordering them
Posted: Mon Nov 28, 2005 11:41 pm
by PASHN8
Somebody.....
Anybody....
Posted: Tue Nov 29, 2005 9:51 am
by Philip Lee
i ordered thur Mania and i just asked for the 96> centre console so i have no idea on the part no.
Posted: Tue Nov 29, 2005 10:11 am
by PASHN8
Thanks Phil
Posted: Tue Nov 29, 2005 11:07 am
by Garry
Why dont you go to a Mazda dealer and have a look on the parts fische for a 97 model? All the bits with their part numbers should be there.
Re:
Posted: Tue Nov 29, 2005 9:05 pm
by Daz 27
PASHN8 wrote:Somebody.....
Anybody....
i have both pieces brand new from Mania, i don't need them now so if you want them let me know.