Whoops, my bad, both made by Plasti-Dip
Armor All Custom Shield vs Plasti Dip
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
Lokiel
- Forum legend
- Posts: 4126
- Joined: Thu May 28, 2009 2:39 pm
- Vehicle: NB SE
- Location: Brisbania
Armor All Custom Shield vs Plasti Dip
Plasti-Dip alternative, Armor All Custom Shield, comparison:
Whoops, my bad, both made by Plasti-Dip
Whoops, my bad, both made by Plasti-Dip
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
-
fastfreddygassit
- Waitin' for a mate
- Posts: 1773
- Joined: Sat Jun 25, 2005 8:00 pm
- Vehicle: NB SE
- Location: Waitin' for a mate in Melbourne somewhere
- Contact:
Re: Armor All Custom Shield vs Plasti Dip
Just used the custom shield on the SE wheels. Looks the same as the Droo's wheels (plasti-dip black).
It's currently on special at SCA for $20/can ($7 off rrp iirc?) which is pretty good value as the Armor All can is a larger capacity than the plasti-dip cans.
Bargain
It's currently on special at SCA for $20/can ($7 off rrp iirc?) which is pretty good value as the Armor All can is a larger capacity than the plasti-dip cans.
Bargain
-
MINX
- Racing Driver
- Posts: 1658
- Joined: Mon Apr 07, 2008 7:51 pm
- Vehicle: NB SE
- Location: Brisbane
Re: Armor All Custom Shield vs Plasti Dip
Just be aware guys.
They are not EASY to simply peel off if you dont like it.
Can be a PIA.
I tried plastidip red on two track rims.
They did i think three track days, so got a bit of heat into them.
Tried to peel them off the other day, nightmare. Kept breaking off in tiny bits.
I ended up soaking it off with rags and turps.
Very very messy and sticky job.
Also left a red stain on them. (as someone else found when they removed red stripes from a white car)
Took a lot longer to clean off than to apply in first place.
Certainly easier than actual paint, but not as easy as simply peel off.
They are not EASY to simply peel off if you dont like it.
Can be a PIA.
I tried plastidip red on two track rims.
They did i think three track days, so got a bit of heat into them.
Tried to peel them off the other day, nightmare. Kept breaking off in tiny bits.
I ended up soaking it off with rags and turps.
Very very messy and sticky job.
Also left a red stain on them. (as someone else found when they removed red stripes from a white car)
Took a lot longer to clean off than to apply in first place.
Certainly easier than actual paint, but not as easy as simply peel off.
Lakeside 1:02.94 Clubman 1:04.61 Sprint 1:00.81 Sportsman 1:04.27 National 1:28.36 WP 1:15.45 MtCotton 0:51.13 Symmons 1:12.2 Baskerville 1:08
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 47 guests
