Hi,
Do you know what the black goop is that sticks the door plastic skin protector to the door frame? I've got new ones and wanted to clean off and reapply some new stuff but don't know what this sticky junk is?
G
Black goop?
Moderators: timk, Stu, zombie, Andrew, -alex, miata
- gslender
- Speed Racer
- Posts: 2330
- Joined: Sat Feb 19, 2011 10:49 pm
- Vehicle: NA6
- Location: Brisbane, QLD
Black goop?
MX5 91 NA6 LE completely stock and loving it!
MX5 92 NA8/ITBs Silver "aka Track Beeotch"
MX5 92 NA8/ITBs Silver "aka Track Beeotch"
- Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Re: Black goop?
sikaflex
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
- NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: Black goop?
Lol, no its not.
But Id replace it with sikaflex.
Dann
But Id replace it with sikaflex.
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
- rob323
- Fast Driver
- Posts: 132
- Joined: Wed Jul 29, 2009 7:51 am
- Vehicle: NA8
- Location: Joyner, Brisbane.
- Contact:
Re: Black goop?
It's butyl. A bitumen based product, horrid as all hell.
Most polyurethane, silicone or acrylic sealants will work.
Most polyurethane, silicone or acrylic sealants will work.
Don't drive it........RALLY it!
- slug_dub
- Racing Driver
- Posts: 1228
- Joined: Fri Jun 19, 2009 11:02 pm
- Vehicle: NA8
- Location: Brisbane
- Contact:
Re: Black goop?
What's an appropriate cleaner to remove Butyl?
The American wrote:hella sic stance flushing pard harker yolo something something.
- rob323
- Fast Driver
- Posts: 132
- Joined: Wed Jul 29, 2009 7:51 am
- Vehicle: NA8
- Location: Joyner, Brisbane.
- Contact:
Re: Black goop?
Any solvent will do it. I recently dynamat'ed my doors.
I scraped as much of that crap off with a putty knife, then dissolved the rest with thinners, then gave it a final bath with brake clean.
I scraped as much of that crap off with a putty knife, then dissolved the rest with thinners, then gave it a final bath with brake clean.
Don't drive it........RALLY it!
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 210 guests