You can get new lights, but I think u'll also need NB8B wheel arch splash guards. Okibi could shine in on this.
edit:
The NB8B bar uses different inner wheel trims and has a different main fastner on the sides.
SE front bumper on a NB8A
Moderators: timk, Stu, -alex, miata, zombie, Andrew
-
philz
- Wheel guru
- Posts: 1297
- Joined: Wed Jun 04, 2008 4:32 pm
- Vehicle: ND - 2 GT
- Location: Sydney
SE front bumper on a NB8A
The SE bumper comes from the NB8B, so no it won't fit the NB8A unless you change the headlights.
You can get new lights, but I think u'll also need NB8B wheel arch splash guards. Okibi could shine in on this.
edit:
You can get new lights, but I think u'll also need NB8B wheel arch splash guards. Okibi could shine in on this.
edit:
-
Okibi
- Speed Racer
- Posts: 10906
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
SE front bumper on a NB8A
The SE bar is an NB8B with a stick on lip.
If you had access to a car like this, would you take it back right away? Neither would I.
-
irwin83r
- Racing Driver
- Posts: 1563
- Joined: Wed Feb 25, 2004 8:32 pm
- Vehicle: NB8A
- Location: wollongong
- Contact:
SE front bumper on a NB8A
the SE head lights arent cheap either.. nore are the nb8b ones really. pretty sure the front quarters are the same though.
-
Fuzzlet
- Racing Driver
- Posts: 1077
- Joined: Sat Feb 25, 2006 6:35 pm
- Vehicle: ND - 2 GT
- Location: Berowra
- Contact:
SE front bumper on a NB8A
SE lights arent cheap, and last time I tried to get one, arent available
Current: Red 04 SE (Slightly modified) - 133rwkw@7psi - Winner of the Mania Dyno Day 2008
Previous: Titanium 04 SE (Standard)
White 94 NA (Severely Modified) - 180rwkw - Runner up at the Mania Dyno Day 2007
Previous: Titanium 04 SE (Standard)
White 94 NA (Severely Modified) - 180rwkw - Runner up at the Mania Dyno Day 2007
-
sliq
- Speed Racer
- Posts: 3414
- Joined: Sat Jan 13, 2007 12:33 am
- Vehicle: ND - 2 GT
- Location: Sydney
- Contact:
SE front bumper on a NB8A
you could always source the NB8B lights, and spray the inside backing of them black.. it's been done before.
i can't brain today.. i have the dumb..
-
Okibi
- Speed Racer
- Posts: 10906
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
SE front bumper on a NB8A
Bumper is about $300, dunno the cost of the inner wheel trims, headlights will cost $600+ you could also get the connector the NB8A bumper uses at the sides as it's different to the NB8A one.
If you had access to a car like this, would you take it back right away? Neither would I.
-
Caffeine
- Racing Driver
- Posts: 1806
- Joined: Wed Apr 23, 2003 11:00 am
- Vehicle: NB8B
- Location: Sydney
SE front bumper on a NB8A
Also, for everyone worrying about getting the specific HB4 connectors for the NB8B headlights, don't bother. Just crimp on a couple of spade connectors...
At least that's what the experts at the mazda dealer I last went to for a service did, to 'fix' an electrical fault that was causing me to blow headlight globes at an alarming rate (2 or 3 weeks per globe)
The fix didn't fix the problem, but the spade connectors work quite well...
At least that's what the experts at the mazda dealer I last went to for a service did, to 'fix' an electrical fault that was causing me to blow headlight globes at an alarming rate (2 or 3 weeks per globe)
The fix didn't fix the problem, but the spade connectors work quite well...
Supreme Blue NB8B, 1:16.98 at Wakefield when stock, but it's not stock any more...
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 3 guests
