Raising Sunken Headlights

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

Post Reply
initial_mx5

Raising Sunken Headlights

Postby initial_mx5 » Tue Jun 27, 2006 9:17 am

Hey everyone. I was looking at my headlights the other day and they seem to be quite sunk into the bonnet (i have a 1990 NA).
Is there a way to raise them back up? (this is when the headlights are down)
Top
Richee
Racing Driver
Posts: 591
Joined: Sun Nov 27, 2005 8:17 am
Vehicle: ND - 2 GT
Location: Brisbane - Westside

Postby Richee » Tue Jun 27, 2006 9:26 am

Just Pull em up. Gently does it and take care not to exert too much pressure. Use as many fingers as possible spread around the cover so you dont pull the covers out of shape.

Hope this makes sense.

Richard
Mazda Tribute - its a boat
Coming - Jayco Eagle wind up camper - woo hoo
Ex cars 2007 NC LE Radiant Ebony, 1990 Eunos Neo Green LE
Top
User avatar
Lucky_Luke
Fast Driver
Posts: 348
Joined: Tue Mar 07, 2006 10:45 pm
Vehicle: NC
Location: Adelaide
Contact:
Contact Lucky_Luke

Postby Lucky_Luke » Tue Jun 27, 2006 10:09 am

Dont you just hate when non-mx5 owners go to look in your engine bay and the first thing they do is \"go in for the kill\" and lean on the the headlight covers... rrr..

sh*ts me to tears, they bend so easily, you have to lunge in with the... \"dont lean on the...\"
One of mine was sunken slighty at one of the top corners, and just took 10sec to 'lovingly' pull it level again.
Top
User avatar
Zimma
Fast Driver
Posts: 105
Joined: Sat Nov 13, 2004 1:27 pm
Vehicle: ND - 2 GT
Location: Melbourne
Contact:
Contact Zimma

Postby Zimma » Tue Jun 27, 2006 5:21 pm

Can't you adjust how low they go by turning the knob on the top of the mechanism that raises/lowers the lights?? :?
ZIMMA
That's what the plates say!
Top
User avatar
Garry
Speed Racer
Posts: 3481
Joined: Sun Apr 27, 2003 11:00 am
Vehicle: NB SP
Location: God's Country
Contact:
Contact Garry

Postby Garry » Tue Jun 27, 2006 9:19 pm

Can't you adjust how low they go by turning the knob on the top of the mechanism that raises/lowers the lights??


No, they will go back to their regular position. If bending them doesn't achieve the desired result there are 4 bolts underneath the black plastic cover to aid with alignment.
Shiney black one with added red bits. Member of the fart club. Now with extra doof and Sunlong. - deceased and gone to heaven
Top
User avatar
JSE
Racing Driver
Posts: 643
Joined: Mon Jan 02, 2006 10:38 am
Vehicle: ND - 2 GT
Location: sydney

Postby JSE » Sun Jul 16, 2006 6:14 pm

Hey Initial_mx5...

Mine were sunken down when I got mine as well...

Use your hands when the bonnet is up and just pull with all your strength mate! Bend them back into place with your hands...Easy.
Image
Top
sharyl

Postby sharyl » Mon Jul 17, 2006 11:54 pm

i'm sure that works but i'd be too chicken :oops:
Top
Adam_NAclubman
Racing Driver
Posts: 1418
Joined: Wed Jan 25, 2006 11:39 pm
Vehicle: NA8 - Turbo
Location: Adelaide, Australia
Contact:
Contact Adam_NAclubman

Postby Adam_NAclubman » Tue Jul 18, 2006 2:31 am

I know what I'm doing tomorrow...
Top
4sfed5
Fast Driver
Posts: 307
Joined: Tue Jul 05, 2005 5:13 pm
Vehicle: NA6 - Turbo
Location: New Zealand
Contact:
Contact 4sfed5

Postby 4sfed5 » Tue Jul 18, 2006 9:15 am

1) remove plastic headlight surround...2) loosen screws holding cover and adjust height as required.

the screws that hold the steel cover are very soft and the phillips head strips out easy. i drilled mine out and replaced with stainless ones.
red'90 vf10 turbo. FMIC,dual feed fuel rail, E Manage, "330cc" injectors.16" ADVAN RG wheels, http://www.cardomain.com/ride/264041/6
Top
Post Reply

Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: No registered users and 203 guests