Page 1 of 1
EOI: carbon fibre vac/inf boot
Posted: Wed Nov 25, 2009 1:50 pm
by lightyear
I was talking to michael down at P.I on the weekend. He suggested that he would be interested in a lightweight c.f boot. If there are any other motorsport guys after one let me know. I will mould my fibreglass boot as it has a built in spoiler/lip. And let me know if you prefer oem latch type or bonnet pins to secure it.
EOI: carbon fibre vac/inf boot
Posted: Wed Nov 25, 2009 1:58 pm
by Cal
Definately interested for the 2B car.
EOI: carbon fibre vac/inf boot
Posted: Fri Nov 27, 2009 10:50 am
by Blue94t
Interested for sure
Race only for me so bonnet pins are fine
would be good with a slip in mechanism at the front and flush pins at the rear though
Seeing your hardtop latch design I am sure you could come up with something nifty and a bit more attractive than the old style bonnet pins
EOI: carbon fibre vac/inf boot
Posted: Wed Dec 23, 2009 6:29 pm
by Hellmun
lightyear wrote:I was talking to michael down at P.I on the weekend. He suggested that he would be interested in a lightweight c.f boot. If there are any other motorsport guys after one let me know. I will mould my fibreglass boot as it has a built in spoiler/lip. And let me know if you prefer oem latch type or bonnet pins to secure it.
Just thought I'd show an interest. I'd rather just the standard latches but I could use bonnet pins as well. Main issue for me though is it can't have a spolier for the race series we compete in (2F).
EOI: carbon fibre vac/inf boot
Posted: Thu Dec 24, 2009 2:28 am
by Curly
I'm interested, but I'm after more of a road car solution.... NA6.
