EOI: carbon fibre vac/inf boot

lightyear · Postby **lightyear** » Wed Nov 25, 2009 1:50 pm

I was talking to michael down at P.I on the weekend. He suggested that he would be interested in a lightweight c.f boot. If there are any other motorsport guys after one let me know. I will mould my fibreglass boot as it has a built in spoiler/lip. And let me know if you prefer oem latch type or bonnet pins to secure it.

Cal · Postby **Cal** » Wed Nov 25, 2009 1:58 pm

Definately interested for the 2B car.

Blue94t · Postby **Blue94t** » Fri Nov 27, 2009 10:50 am

Interested for sure

Race only for me so bonnet pins are fine
would be good with a slip in mechanism at the front and flush pins at the rear though
Seeing your hardtop latch design I am sure you could come up with something nifty and a bit more attractive than the old style bonnet pins

Hellmun · Postby **Hellmun** » Wed Dec 23, 2009 6:29 pm

lightyear wrote:I was talking to michael down at P.I on the weekend. He suggested that he would be interested in a lightweight c.f boot. If there are any other motorsport guys after one let me know. I will mould my fibreglass boot as it has a built in spoiler/lip. And let me know if you prefer oem latch type or bonnet pins to secure it.

Just thought I'd show an interest. I'd rather just the standard latches but I could use bonnet pins as well. Main issue for me though is it can't have a spolier for the race series we compete in (2F).