mx5cartalk.com

Posted: **Wed Sep 06, 2006 12:09 am**

because...

damn it sexy

Posted: **Wed Sep 06, 2006 9:53 am**

I'd say no as it's too low and your helmeted head will stick over the hoops. The Brown Davis has troubles and really needs a race seat be be CAMS approved.

Posted: **Wed Sep 06, 2006 12:54 pm**

No chance in the wide world. Cage must at least have a single one piece main hoop with two rear stays, one forward stay and minimum of 1 diagonal in the main hoop, two are now recommended. And that's the bare minimum which means a brown davis with a forward stay attached to the centre of the main hoop dropping down to the passenger floor would be the absolute minimum required to pass.

Posted: **Wed Sep 06, 2006 3:10 pm**

The side of the bar is a problem; you have to loose the soft top so that you gain the width of the bar.

Posted: **Wed Sep 06, 2006 6:03 pm**

poop

yeah guess if BD has problems anything less is just being silly

cheers.

Posted: **Wed Sep 06, 2006 7:01 pm**

looks sweeet though

Posted: **Wed Sep 06, 2006 9:44 pm**

yeah.

theres one being made in uk that has a twin hoop look that may pass cams for club level stuff apparently. but its a big maybe.

ill try and find a pic

mx5cartalk.com

this look like it would pass cams?

this look like it would pass cams?