mx5cartalk.com

Somewhere out there there's a pdf file that explains exactly how to fit a BD rollbar. It's beautifully written by a captain of the SA MX5 club, who's a professional technical writer.

I know all this because David Brown told me so. He also told me he can't give it to me because his computer has become totally dead.

If anyone has a copy could they mail it to me please?

My rollbar looks cr*p sitting on the garage floor.

Cant say i've ever seen the file your after

They're not all that hard to install though

This forum works so well!

Thanks Sam.

For future reference, link here

http://www.fastdump.net/138086

sorry to revive an old thread, but where can i find this file?? I have tried the link but its coming up with nothing..

cheers
Ryan

now at ...

http://www.fastdump.net/594041-Brown%20Davis%20MX5%20Roll%20bar%20installation%20tips.pdf

manga

....and also now here.

awesome, thanks very much...

I wish I had some instructions when I was fitting my bar. David was going to send them with it but nope they never got here. I figured it out in the end with the help of a drill, some hole saws and some spanners the little sister was handy for doing up the bolts through the boot too.(my arms weren't quite long enough)

Thanks also.

I have finally got around to posting the install photos and details from our Dodgy Day as a .pdf file for download. This was originally written for the NSW Club Magazine, but I figure it might help some interstate forumites too. Better late than never! Let me know if you have any problems accessing the file or downloading it. Mods - you may want to add the file to the tech archives for all to see.

Cheers,

Bigdog.

linky

Thanx BD, that's a much better set of instructions.

manga

I had to use a 18mm spacer (with holes cut for the harness bolts) between the metal plate over the fuel tank and the brown davis to angle the bar forward enough to fit a hard top.